TS914IDT STMicroelectronics, CMOS, Op Amp, RRIO, 800kHz, 2.7 → 16 V, 14-Pin SO
- RS Stock No.:
- 196-2114P
- Mfr. Part No.:
- TS914IDT
- Brand:
- STMicroelectronics
Subtotal 5 units (supplied on a continuous strip)*
£7.04
(exc. VAT)
£8.45
(inc. VAT)
FREE delivery for orders over £50.00
In Stock
- Plus 6,240 unit(s) shipping from 13 October 2025
- Plus 999,993,755 unit(s) shipping from 12 January 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
|---|---|
| 5 + | £1.408 |
*price indicative
- RS Stock No.:
- 196-2114P
- Mfr. Part No.:
- TS914IDT
- Brand:
- STMicroelectronics
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | STMicroelectronics | |
| Amplifier Type | CMOS | |
| Mounting Type | Surface Mount | |
| Package Type | SO | |
| Power Supply Type | Single | |
| Number of Channels per Chip | 4 | |
| Pin Count | 14 | |
| Typical Single Supply Voltage | 2.7 → 16 V | |
| Typical Gain Bandwidth Product | 800kHz | |
| Typical Slew Rate | 0.5V/µs | |
| Minimum Operating Temperature | -40 °C | |
| Maximum Operating Temperature | +125 °C | |
| Output Current | 40 mA | |
| Rail to Rail | Rail to Rail Input/Output | |
| Typical Voltage Gain | 10 V/mV | |
| Maximum Input Voltage | 5.5 V | |
| Offset Voltage | 5mV | |
| Dimensions | 8.75 x 4 x 1.65mm | |
| Input Offset Current | 200pA | |
| Input Voltage Range | 2.7 → 16 V | |
| Width | 4mm | |
| Minimum Input Voltage | 2.7 V | |
| Height | 1.65mm | |
| Length | 8.75mm | |
Select all | ||
|---|---|---|
Brand STMicroelectronics | ||
Amplifier Type CMOS | ||
Mounting Type Surface Mount | ||
Package Type SO | ||
Power Supply Type Single | ||
Number of Channels per Chip 4 | ||
Pin Count 14 | ||
Typical Single Supply Voltage 2.7 → 16 V | ||
Typical Gain Bandwidth Product 800kHz | ||
Typical Slew Rate 0.5V/µs | ||
Minimum Operating Temperature -40 °C | ||
Maximum Operating Temperature +125 °C | ||
Output Current 40 mA | ||
Rail to Rail Rail to Rail Input/Output | ||
Typical Voltage Gain 10 V/mV | ||
Maximum Input Voltage 5.5 V | ||
Offset Voltage 5mV | ||
Dimensions 8.75 x 4 x 1.65mm | ||
Input Offset Current 200pA | ||
Input Voltage Range 2.7 → 16 V | ||
Width 4mm | ||
Minimum Input Voltage 2.7 V | ||
Height 1.65mm | ||
Length 8.75mm | ||
- COO (Country of Origin):
- PH
The TS914 device is a rail-to-rail CMOS quad operational amplifier designed to operate with a single or dual supply voltage. The input voltage range Vicm includes the two supply rails VCC+and VCC-. The output reaches VCC- +50 mV, VCC+-50 mV, with RL= 10 kΩ, and VCC- +350 mV, VCC+-350 mV, with RL= 600 Ω. This product offers a broad supply voltage operating range from 2.7 to 16 V and a supply current of only 200 μA/amp (VCC= 3 V). The source and sink output current capability is typically 40 mA (at VCC= 3 V), fixed by an internal limitation circuit.
Rail-to-rail input and output voltage ranges
Single (or dual) supply operation from 2.7 to 16 V
Extremely low input bias current: 1 pA typical
Low input offset voltage: 5 mV max. (A grade)
Specified for 600 Ω and 100 Ω loads
Low supply current: 200 μA/ampli. (VCC= 3 V)
Latch-up immunity
Spice macromodel included in this specification
Single (or dual) supply operation from 2.7 to 16 V
Extremely low input bias current: 1 pA typical
Low input offset voltage: 5 mV max. (A grade)
Specified for 600 Ω and 100 Ω loads
Low supply current: 200 μA/ampli. (VCC= 3 V)
Latch-up immunity
Spice macromodel included in this specification