MAX4478ASD+ Maxim Integrated, High Speed, Op Amp, RRO, 10MHz, 2.7 → 5.5 V, 14-Pin SOIC
- RS Stock No.:
- 189-8720P
- Mfr. Part No.:
- MAX4478ASD+
- Brand:
- Maxim Integrated
Subtotal 5 units (supplied in a tube)*
£18.80
(exc. VAT)
£22.55
(inc. VAT)
FREE delivery for orders over £50.00
Last RS stock
- Final 110 unit(s), ready to ship
Units | Per unit |
|---|---|
| 5 + | £3.76 |
*price indicative
- RS Stock No.:
- 189-8720P
- Mfr. Part No.:
- MAX4478ASD+
- Brand:
- Maxim Integrated
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Maxim Integrated | |
| Amplifier Type | High Speed | |
| Mounting Type | Surface Mount | |
| Package Type | SOIC | |
| Power Supply Type | Single | |
| Number of Channels per Chip | 4 | |
| Pin Count | 14 | |
| Typical Single Supply Voltage | 2.7 → 5.5 V | |
| Typical Gain Bandwidth Product | 10MHz | |
| Typical Slew Rate | 3V/µs | |
| Maximum Operating Temperature | +125 °C | |
| Minimum Operating Temperature | -40 °C | |
| Rail to Rail | Rail to Rail Output | |
| Typical Voltage Gain | 120 dB | |
| Length | 8.75mm | |
| Dimensions | 8.75 x 4 x 1.5mm | |
| Height | 1.5mm | |
| Typical Input Voltage Noise Density | 4.5nV/√Hz | |
| Width | 4mm | |
Select all | ||
|---|---|---|
Brand Maxim Integrated | ||
Amplifier Type High Speed | ||
Mounting Type Surface Mount | ||
Package Type SOIC | ||
Power Supply Type Single | ||
Number of Channels per Chip 4 | ||
Pin Count 14 | ||
Typical Single Supply Voltage 2.7 → 5.5 V | ||
Typical Gain Bandwidth Product 10MHz | ||
Typical Slew Rate 3V/µs | ||
Maximum Operating Temperature +125 °C | ||
Minimum Operating Temperature -40 °C | ||
Rail to Rail Rail to Rail Output | ||
Typical Voltage Gain 120 dB | ||
Length 8.75mm | ||
Dimensions 8.75 x 4 x 1.5mm | ||
Height 1.5mm | ||
Typical Input Voltage Noise Density 4.5nV/√Hz | ||
Width 4mm | ||
Precision and Low-Noise Operational Amplifiers, Maxim Integrated
The precision and low-noise operational amplifiers are crucially specified for the input offset voltage and the input voltage noise. They are often used to condition the analogue signal from a sensor before it enters an Analogue-to-Digital Converter (ADC).
Note
Please note that any defect or non – conformance of this product must be discovered and reported to RS within 20 days of purchase.
Operational Amplifiers, Maxim Integrated