Eaton Fuse, Radial 2A, 250V ac
- RS Stock No.:
- 169-9528
- Mfr. Part No.:
- SS-5-2A-BK
- Brand:
- Eaton
Subtotal (1 bag of 200 units)*
£140.00
(exc. VAT)
£168.00
(inc. VAT)
FREE delivery for orders over £60.00
Temporarily out of stock
- Shipping from 08 December 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit | Per Bag* |
|---|---|---|
| 200 + | £0.70 | £140.00 |
*price indicative
- RS Stock No.:
- 169-9528
- Mfr. Part No.:
- SS-5-2A-BK
- Brand:
- Eaton
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Eaton | |
| Product Type | Fuse | |
| Current Rating | 2A | |
| Lead Orientation | Radial | |
| Voltage | 250V ac | |
| Fuse Speed | T | |
| Body Material | Plastic | |
| Length | 8.5mm | |
| Lead Length | 4.3mm | |
| Width | 4.3mm | |
| Height | 8.35mm | |
| Minimum Operating Temperature | -40°C | |
| Fuse Characteristics | Time Delay | |
| Breaking Capacity | 35A | |
| Maximum Operating Temperature | 125°C | |
| Diameter | 0.6mm | |
| Standards/Approvals | IEC 600680, UL 94V0, RoHS, VDE | |
| Series | SS5 | |
| Lead Diameter | 0.6mm | |
| Select all | ||
|---|---|---|
Brand Eaton | ||
Product Type Fuse | ||
Current Rating 2A | ||
Lead Orientation Radial | ||
Voltage 250V ac | ||
Fuse Speed T | ||
Body Material Plastic | ||
Length 8.5mm | ||
Lead Length 4.3mm | ||
Width 4.3mm | ||
Height 8.35mm | ||
Minimum Operating Temperature -40°C | ||
Fuse Characteristics Time Delay | ||
Breaking Capacity 35A | ||
Maximum Operating Temperature 125°C | ||
Diameter 0.6mm | ||
Standards/Approvals IEC 600680, UL 94V0, RoHS, VDE | ||
Series SS5 | ||
Lead Diameter 0.6mm | ||
- COO (Country of Origin):
- CN
Eaton SS5 Series Fuse, 2A Current Rating, 250V AC Voltage - SS-5-2A-BK
This fuse is a time-delay protective device designed for use in electrical and electronic assemblies where controlled overcurrent protection is required. It operates on AC systems and is intended for radial mounting on printed circuit layouts, providing delayed interruption to tolerate temporary surges while protecting circuits from sustained faults.
Features and Benefits:
• 2A rating allows precise overcurrent protection for low-current circuits • T-speed time-delay characteristic tolerates brief inrush currents • 35A breaking capacity enables safe interruption of higher fault currents • Radial lead orientation supports straightforward PCB insertion • Maximum operating temperature 125°C permits use in warm environments
Applications
• Suitable for protecting control circuits in automation panels • Ideal for small power supplies and consumer electronics modules • Used with sensor and actuator Interface boards in machinery • Can be used for retrofitting protection in legacy PCB designs
What electrical supply can this device be used with?
It is rated for operation on 250V AC systems, making it suitable for standard single-phase AC applications.
What physical form factor should designers expect when planning PCB layouts?
The component has a Compact profile and uses radial leads with 0.6mm diameter and 4.3mm length, allowing through-hole placement on standard PCB pads.
How does the construction support assembly and environmental conditions?
The body is MADE from a plastic material that meets flammability and safety standards while the lead geometry facilitates automated or manual insertion.
Which approvals relate to material and safety performance?
The component complies with recognised standards for material flammability and environmental directives as evidenced by its listed approvals.
What operating temperature range must be considered for installation?
It functions from -40°C up to 125°C, so thermal planning should account for maximum ambient and internal heating.
Note
Eaton formerly known as Bussmann