Fluke 1AC Non Contact Voltage Detector, 200V ac to 1000V ac

The Fluke 1AC senses the steady state electrostatic field produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage.

Expanded range: 200 V AC to 1000 V AC
20 V to 90 V AC control circuit model also available
On/Off Button
Audible/Silent
IP Rating: IP 40
2 AAA alkaline batteries included
5 pack

CAT IV 1000 V

Pinpoint the amount of power running through your electric circuit with this non-contact voltage detector from FLUKE. It works by measuring the electrostatic field from the insulation voltage of your AC electrical systems, removing the need for direct physical contact with a live wire. When the unit senses voltage, its tip glows bright red and the detector beeps, so you get a combined audible and visual notification. With a voltage sensing range between 200 and 1000V AC, you'll find this tool handy for measuring your high-power circuits.

• Audible alarm can be switched off for use in quiet settings
• Integrated on/off button for convenient control
• Durable operation in harsh settings thanks to an operating temperature range between -10°C and +50°C

• Electrical engineering
• Construction industry
• Communications equipment
• Facilities management

The unit is battery-powered and comes with two AAA alkaline batteries. These should last for more than a year, so you won't need to worry about replacing them any time soon.

You can keep this low-maintenance detector in tip-top condition by cleaning it with a damp cloth between each use.

’Buy a Fluke, Get one Free’ is back!!
Between March 1st, 2024 and August 31st, 2024, the customer spends £150 or more on a qualifying Fluke product (Fluke Industrial, Fluke Calibration, Fluke Networks, or Beha-Amprobe).
Customer claims their tool online at: www.fluke.co.uk/freefluke
A proof of purchase in the form of a receipt or invoice is required.