Schmersal RSS 36 Series Non-Flush RFID Non-Contact Safety Switch, 20.4 → 26.4V dc, Reinforced Thermoplastic

The RSS36 electronic safety sensor with unique diagnosis meets the highest safety requirements, even when series-wired. It also features new coding functions for the uniform allocation of the actuator to the sensor, this is realised through the integrated RFID technology. The RSS36 has three different coding variants to enable an optimal conformation to the required protection against tampering. The universal mounting features and the optional latching function provides a smooth and rational integration in separating safety guards.

Thermoplastic enclosure
Misaligned actuation possible
Dimensions: 27 x 108.2 x 35 mm
High repeat accuracy of the switching points
2 short-circuit proof PNP safety outputs
Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
Increased protection against tampering by optional individual coding of safety sensor and actuator
Safety and diagnostic signals can be wired in series
LED status indication
Sensor with connecting cable or with integrated connector
Robust due to the used cleaning agent-resistant materials and protection class up to IP69K

Actuators must be ordered separately.
Stock no. 880-1769 comes with a latching magnet.
Stock no. 880-1763 comes without a latching magnet.

TUV, cULus, ECOLAB.

EN ISO 13849-1, IEC 61508, IEC 60947-5-3, EN 62061.

Automatically control the operating states of your machinery with this safety switch from Schmersal. It uses RFID technology to ensure compatibility between the sensor and actuator, helping to reduce the risk of tampering. As it's a non-contact switch, there's minimal risk of mechanical wear for an enhanced service life. Thanks to a wide operating temperature range between -25°C and +70°C, this device is suitable for use in demanding conditions. It has a standard M12 connector for a simple electrical connection.

• IP67 rating means it's protected against dust and immersion in 1m of water for up to 30 minutes
• Glass fibre-reinforced thermoplastic housing for resistance to heat and impact

• Automotive industry
• Pharmaceutical laboratories
• Robotics and automation

This switch has three LEDs that allow you to easily monitor its status. A green LED indicates supply voltage, a yellow LED indicates the switching condition and a red LED indicates errors, making it easy to troubleshoot.