Beha-Amprobe SC-7000 Signal Clamp for AT-7000 Advanced Wire Tracer

Beha-Amprobe SC-7000-EUR signal clamp is used with Beha-Amprobe AT-7000 advanced wire tracers when there is no access to bare conductors. The clamp induces a signal into either energised or de-energised circuits for wire tracing and load locating. The AT-7000-TE transmitter 'clamp' mode provides a boosted 6 kHz signal through the clamp to further improve accuracy and performance.

For inducing signal into wires without access to bare conductors
Jaw opening 5.08 cm (2 in)
Operating temperature range -17.77 °C to +49 °C (0 to 120 °F)
Operating humidity 95% RH max
Measurement Category CAT IV 600 V
Drop test 1 m (3.28 ft)
Protection rating IP52
Dimensions 20.83 x 8.13 x 4.27 cm (8.2 x 3.2 x 1.68 in)
Weight 0.294 kg (0.648 lb)

SC-7000-EUR signal clamp is included in Beha-Amprobe Advanced Wire Tracer Kit AT-7030-EUR ( 909-4127 ). The signal clamp is not included in Beha-Amprobe Advanced Wire Tracer Kit AT-7020-EUR ( 909-4120 ).