Hirschmann Test & Measurement Multimeter Test Lead 932793001 Test Equipment Set

Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

Hirschmann Test & Measurement Multimeter Safety Probe Set

Brought to you by Hirschmann Test & Measurement. A high-quality 4 mm test lead set ideal for general laboratory use. Connecting to multimeters, these test leads and probes provide excellent precision within electronic readings. All models are highly reliable and excellent quality.

Features and Benefits

• 4 mm plugs
• Gripper and hard point test probes
• 1m lead length
• Maximum working voltage - 60 V dc

What are test leads?

These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.

What are test probes?

Connecting to multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Hirschmann Test & Measurement, each probe provides much-needed precision.

What are the differences between safety categories?

For protection, safety categories are an important attribute which must be taken into consideration for any electronic test equipment. With any category (i.e CAT II, CAT III), a higher voltage will indicate a higher level of protection. As an example, a test probe providing CAT III 1000 V, provides a higher degree of protection than a CAT III 600 V probe.

Kit Contents

• Red and black hard point test probes
• Red and black gripper test probes
• Red and black crocodile clips (clasping dia. 9.5 mm)
• Red and black PVC 1m stackable test leads

Red and black hard point test probes
Red and black gripper test probes
Red and black crocodile clips (clasping dia. 9.5mm)
Red and black PVC 1m stackable test leads
Maximum working voltage 60V d.c.

High quality 4mm test lead set ideal for general laboratory use.
Contents:

Specifications
Attribute Value
Lead Type Test Equipment Set
Connector Type Crocodile Clip, Spring Loaded Plug
Lead Length 1m
Minimum Operating Temperature -15°C
Maximum Operating Temperature +70°C
117 In stock - FREE next working day delivery available
Price Each
£ 23.24
(exc. VAT)
£ 27.89
(inc. VAT)
Units
Per unit
1 +
£23.24
Related Products
RS Pro back probe pin set made from ...
Description:
RS Pro back probe pin set made from durable steel. Perfect for connecting to fuel injectors, MAP and TPS sensors and any weather pack seal type connectors. The modular design is compatible with any industry-standard, 4 mm plug whether shrouded or not. Suitable for use with any test lead. All ...
Brought to you by RS PRO, a back ...
Description:
Brought to you by RS PRO, a back probe pin set, made from durable steel. Perfect for connecting to fuel injectors, MAP and TPS sensors and any weather pack seal type connectors. The modular design is compatible with any industry-standard, 4 mm plug whether shrouded or not. Suitable for use ...
This auxiliary test lead is designed for use ...
Description:
This auxiliary test lead is designed for use with a wide range of earth loop impedance testers and RCD testers. Both the red and black probes are fused to enhance the safety of the user. A pair of shrouded safety crocodile clips are also available. Thin fine insulated prods set ...
Slim-Line Binding Post, 15 Amps, 1000V. The BU‐P4243 ...
Description:
Slim-Line Binding Post, 15 Amps, 1000V. The BU‐P4243 is a slim‐line binding post which accepts non‐shrouded and retractable 4mm banana plugs as well as bare wire and 7mm (ID) spade connectors. Internal wires connected by solder post.Material: Bright Tin Plated Brass with Polycarbonate Insulators and High Temp ABS Spacer Panel ...