Fluke I1010 Multimeter Current Clamp Adapter, 1000A, 600A ac, 30mm
- RS Stock No.:
- Mfr. Part No.:
RoHS Status: Not Applicable
- COO (Country of Origin):
Fluke Current Probes
Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead.
Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia.
d.c. current zero control for nulling out jaw/sensor offset
Superior noise immunity allows measurement in electrically noisy environments, such as adjustable speed drive line-side and load currents
Shielded, heat-resistant silicon rubber cable connects clamp to digital multimeter
Battery check mode
Compatible with meter input impedance ≥1MΩ
Conforms to IEC 1010-1 Cat III 600V
Supplied With: 9V PP3 alkaline battery and operators manual.
Buy Fluke products and claim another Fluke product free.
Between September 1, 2020 and December 15, 2020 customer who purchase a Fluke product (inc. Fluke Networks) have the opportunity to claim a free product through the Fluke website with the original proof of purchase, invoice, or receipt. The product can be claimed by visiting the Fluke website - www.fluke.co.uk/freefluke. There are six levels of free tools to claim. They are separated based on the value of the qualifying purchase, starting at as little as only £100. For each level there is a fixed range of products to claim, based on the value of the original purchase.
|Maximum DC Current||1000A|
|Maximum AC Current||600A ac|
|Best Accuracy||±2% + 0.5 A|
|Maximum Conductor Size||30mm|
|Safety Category||CAT III 600 V|
|Connector Type||4 mm Plug|
|Battery Life||60 h|
|Maximum Operating Temperature||+50°C|
|Minimum Operating Temperature||-10°C|
|Safety Category Level||CAT III|
|Model Number p||I1010|
|Safety Category Voltage||600V|