Renesas Electronics, Brushed DC Motor Motor Driver IC, 46 V 4 A 15-Pin, Multiwatt
- RS Stock No.:
- 636-384P
- Mfr. Part No.:
- L298N
- Brand:
- Renesas Electronics
Bulk discount available
Subtotal 10 units (supplied in a tube)*
£74.00
(exc. VAT)
£88.80
(inc. VAT)
FREE delivery for orders over £60.00
Last RS stock
- Final 1 unit(s), ready to ship
Units | Per unit |
|---|---|
| 10 + | £7.40 |
*price indicative
- RS Stock No.:
- 636-384P
- Mfr. Part No.:
- L298N
- Brand:
- Renesas Electronics
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Renesas Electronics | |
| Motor Type | Brushed DC Motor | |
| Product Type | Motor Driver IC | |
| Configuration | Dual Full-Bridge Driver | |
| Maximum IGBT Collector Current | 4A | |
| Maximum Collector Emitter Voltage Vceo | 46V | |
| Mount Type | Through Hole | |
| Package Type | Multiwatt | |
| Pin Count | 15 | |
| Output Current | 2A | |
| Minimum Supply Voltage | 4.8V | |
| Maximum Supply Voltage | 46V | |
| Typical Switching Frequency | 40kHz | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | 130°C | |
| Height | 10.7mm | |
| Length | 19.6mm | |
| Series | L298 | |
| Standards/Approvals | No | |
| Inverter Power Rating | 25W | |
| Supply Current | 70mA | |
| Automotive Standard | No | |
| Select all | ||
|---|---|---|
Brand Renesas Electronics | ||
Motor Type Brushed DC Motor | ||
Product Type Motor Driver IC | ||
Configuration Dual Full-Bridge Driver | ||
Maximum IGBT Collector Current 4A | ||
Maximum Collector Emitter Voltage Vceo 46V | ||
Mount Type Through Hole | ||
Package Type Multiwatt | ||
Pin Count 15 | ||
Output Current 2A | ||
Minimum Supply Voltage 4.8V | ||
Maximum Supply Voltage 46V | ||
Typical Switching Frequency 40kHz | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature 130°C | ||
Height 10.7mm | ||
Length 19.6mm | ||
Series L298 | ||
Standards/Approvals No | ||
Inverter Power Rating 25W | ||
Supply Current 70mA | ||
Automotive Standard No | ||
L298 Dual Full Bridge Motor Driver
ST Microelectronics presents its L298 dual full bridge driver series. The L298 series from ST is an integrated high voltage, high current dual full bridge driver. These devices are specially designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that allow the L298 to be enabled or disabled independently of the input signals. The emitters of the lower transistors of each bridge are connected together, the corresponding external Terminal can be used to connect an external sensing resistor. In addition, a supply input is provided so that the logic works at a lower voltage.
Features
What are Motor Driver IC's?
Motor Driver ICs are current amplifiers and are an essential component of motor interfacing. The motor driver integrated circuit chip acts as the Interface between a microprocessor or microcontroller, and a motor. As microprocessors tend to operate at lower currents, and motors at higher, motor driver ICs are needed to supply current to the motor as needed. The RS Components range of Motor Driver ICs includes models from leading brands, in various types and configurations to support your design needs.