STMicroelectronics L6470PD, Stepper Motor Driver IC 36-Pin, PowerSO
- RS Stock No.:
- 196-1932P
- Mfr. Part No.:
- L6470PD
- Brand:
- STMicroelectronics
Subtotal 1 unit (supplied in a tube)*
£5.65
(exc. VAT)
£6.78
(inc. VAT)
FREE delivery for orders over £50.00
In Stock
- 997 unit(s) ready to ship
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
|---|---|
| 1 + | £5.65 |
*price indicative
- RS Stock No.:
- 196-1932P
- Mfr. Part No.:
- L6470PD
- Brand:
- STMicroelectronics
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | STMicroelectronics | |
| Motor Type | Stepper | |
| Configuration | Dual | |
| Maximum Output Current | 3A | |
| Maximum Supply Voltage | 45 V | |
| Mounting Type | Surface Mount | |
| Package Type | PowerSO | |
| Pin Count | 36 | |
| Maximum Operating Supply Voltage | 45 V | |
| Minimum Operating Supply Voltage | 8 V | |
| Typical Switching Frequency | 800kHz | |
| Product Length | 16mm | |
| Length | 16mm | |
| Maximum Operating Temperature | +150 °C | |
| Product Width | 11.1mm | |
| Dimensions | 16 x 11.1 x 3.3mm | |
| Minimum Operating Temperature | -40 °C | |
| Product Height | 3.3mm | |
| Width | 11.1mm | |
| Height | 3.3mm | |
Select all | ||
|---|---|---|
Brand STMicroelectronics | ||
Motor Type Stepper | ||
Configuration Dual | ||
Maximum Output Current 3A | ||
Maximum Supply Voltage 45 V | ||
Mounting Type Surface Mount | ||
Package Type PowerSO | ||
Pin Count 36 | ||
Maximum Operating Supply Voltage 45 V | ||
Minimum Operating Supply Voltage 8 V | ||
Typical Switching Frequency 800kHz | ||
Product Length 16mm | ||
Length 16mm | ||
Maximum Operating Temperature +150 °C | ||
Product Width 11.1mm | ||
Dimensions 16 x 11.1 x 3.3mm | ||
Minimum Operating Temperature -40 °C | ||
Product Height 3.3mm | ||
Width 11.1mm | ||
Height 3.3mm | ||
- COO (Country of Origin):
- MY
The L6470 device, realized in Analogue mixed signal technology, is an advanced fully integrated solution suitable for driving two-phase bipolar stepper motors with microstepping. It integrates a dual low RDS(on)DMOS full bridge with all of the power switches equipped with an accurate on-chip current sensing circuitry suitable for non-dissipative current control and overcurrent protection. Thanks to a unique control system, a true 1/128 steps resolution is achieved. The digital control core can generate user defined motion profiles with acceleration, deceleration, speed or target position, easily programmed through a dedicated registers set. All commands and data registers, including those used to set Analogue values (i.e. current control value, current protection trip point, deadtime, PWM frequency, etc.) are sent through a standard 5-Mbit/s SPI.