ROHM BD7763EFV-E2, Stepper Motor Driver IC 54-Pin, HTSSOP
- RS Stock No.:
- 185-0185
- Mfr. Part No.:
- BD7763EFV-E2
- Brand:
- ROHM
Stock information currently inaccessible
- RS Stock No.:
- 185-0185
- Mfr. Part No.:
- BD7763EFV-E2
- Brand:
- ROHM
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | ROHM | |
| Motor Type | Stepper | |
| Configuration | H Bridge | |
| Maximum Supply Voltage | 13.2 V | |
| Mounting Type | Surface Mount | |
| Package Type | HTSSOP | |
| Maximum Operating Supply Voltage | 13.2 V | |
| Pin Count | 54 | |
| Minimum Operating Supply Voltage | 10.8 V | |
| Product Width | 7.5mm | |
| Height | 0.85mm | |
| Maximum Operating Temperature | +75 °C | |
| Length | 18.5mm | |
| Product Length | 18.5mm | |
| Width | 7.5mm | |
| Product Height | 0.85mm | |
| Minimum Operating Temperature | -20 °C | |
| Dimensions | 18.5 x 7.5 x 0.85mm | |
| Select all | ||
|---|---|---|
Brand ROHM | ||
Motor Type Stepper | ||
Configuration H Bridge | ||
Maximum Supply Voltage 13.2 V | ||
Mounting Type Surface Mount | ||
Package Type HTSSOP | ||
Maximum Operating Supply Voltage 13.2 V | ||
Pin Count 54 | ||
Minimum Operating Supply Voltage 10.8 V | ||
Product Width 7.5mm | ||
Height 0.85mm | ||
Maximum Operating Temperature +75 °C | ||
Length 18.5mm | ||
Product Length 18.5mm | ||
Width 7.5mm | ||
Product Height 0.85mm | ||
Minimum Operating Temperature -20 °C | ||
Dimensions 18.5 x 7.5 x 0.85mm | ||
- COO (Country of Origin):
- DE
BD7763EFV are 9ch system motor driver ICs, developed for the spindle motor, actuator coil, stepping motor, SA stepping motor and the loading motor drive of the Blu-ray drive. Since spindle driver adopts sensor less drive system and the hall sensor (3 pieces) of the motor position detection is not needed, it is suitable for making of flexible cable conserve wiring and the reductions of external parts. The actuator, loading driver, the spindle, stepping, and SA stepping use power MOSFET to reduce power consumption.
The hall sensor is not needed by 3-phase sensor less drive system.
The spindle motor driver achieves stability high speed start by ROHM's own energizing method.
Spindle, stepping and SA stepping achieve high efficiency drive by PWM control driver.
The actuator is able to reduce power consumption by using PWM drive system.
The loading adopts forward/reverse-rotation drive system.
ON/OFF of loading and other channels, brake mode of spindle driver, and stand-by mode are selectable by the two control terminals.
Built-in thermal-shut down circuit.
Improved heat radiation efficiency utilizing lm-type HTSSOP package with good thermal conductivity.
The spindle motor driver achieves stability high speed start by ROHM's own energizing method.
Spindle, stepping and SA stepping achieve high efficiency drive by PWM control driver.
The actuator is able to reduce power consumption by using PWM drive system.
The loading adopts forward/reverse-rotation drive system.
ON/OFF of loading and other channels, brake mode of spindle driver, and stand-by mode are selectable by the two control terminals.
Built-in thermal-shut down circuit.
Improved heat radiation efficiency utilizing lm-type HTSSOP package with good thermal conductivity.