Infineon BTN7970BAUMA1, BLDC Motor Driver IC, 18 V 50A 7-Pin, TO-263
- RS Stock No.:
- 165-7508
- Mfr. Part No.:
- BTN7970BAUMA1
- Brand:
- Infineon
Currently unavailable
We don’t know if this item will be back in stock, it is being discontinued by the manufacturer.
- RS Stock No.:
- 165-7508
- Mfr. Part No.:
- BTN7970BAUMA1
- Brand:
- Infineon
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Infineon | |
| Motor Type | BLDC | |
| Output Configuration | Half Bridge | |
| Maximum IGBT Collector Current | 50A | |
| Maximum Collector Emitter Voltage | 18 V | |
| Mounting Type | Surface Mount | |
| Package Type | TO-263 | |
| Pin Count | 7 | |
| Maximum Operating Supply Voltage | 18 V | |
| Minimum Operating Supply Voltage | 8 V | |
| Typical Switching Frequency | 25kHz | |
| Length | 10mm | |
| Maximum Operating Temperature | +150 °C | |
| Minimum Operating Temperature | -40 °C | |
| Dimensions | 10 x 9.25 x 4.4mm | |
| Width | 9.25mm | |
| Height | 4.4mm | |
Select all | ||
|---|---|---|
Brand Infineon | ||
Motor Type BLDC | ||
Output Configuration Half Bridge | ||
Maximum IGBT Collector Current 50A | ||
Maximum Collector Emitter Voltage 18 V | ||
Mounting Type Surface Mount | ||
Package Type TO-263 | ||
Pin Count 7 | ||
Maximum Operating Supply Voltage 18 V | ||
Minimum Operating Supply Voltage 8 V | ||
Typical Switching Frequency 25kHz | ||
Length 10mm | ||
Maximum Operating Temperature +150 °C | ||
Minimum Operating Temperature -40 °C | ||
Dimensions 10 x 9.25 x 4.4mm | ||
Width 9.25mm | ||
Height 4.4mm | ||
Motor Driver ICs, Infineon
Infineon offer a variety of drivers that offer a solution for motor controls and drives. The selection includes Integrated Full-Bridge, Powertrain H-Bridge, TrilithIC, NovalithIC as well as Servo and Stepper motor drivers.The H-bridge is suited to applications such as DC brush motors. The TrilithIC integrates two high-side and two low-side switches which are meant to drive high-current DC motors in an H-bridge arrangement. Infineon’s single half-bridge drivers like NovalithIC are intended for automotive and industrial demands. Whereas the servo driver is widely used in head light beam control and the Stepper motor driver is for driving bipolar stepper motors.
Trilith ICs include overcurrent and over-temperature protection for the high-side switches
All Servo Drivers offer over temperature and over current protection as well as over and under voltage lockout except the TLE4205G (462-7823)
All Servo Drivers offer over temperature and over current protection as well as over and under voltage lockout except the TLE4205G (462-7823)
Motor Controllers & Drivers, Infineon