Geckodrive Stepper Motor Controller, 7 A, 80 V dc
- RS Stock No.:
- 793-4121
- Mfr. Part No.:
- G203V
- Brand:
- Geckodrive
Subtotal (1 unit)*
£281.10
(exc. VAT)
£337.32
(inc. VAT)
FREE delivery for orders over £50.00
In Stock
- 11 unit(s) ready to ship
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
|---|---|
| 1 + | £281.10 |
*price indicative
- RS Stock No.:
- 793-4121
- Mfr. Part No.:
- G203V
- Brand:
- Geckodrive
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Geckodrive | |
| Current Rating | 7 A | |
| Voltage Rating | 80 V dc | |
| Overall Length | 63.5mm | |
| Overall Width | 21mm | |
| Overall Depth | 65.5mm | |
Select all | ||
|---|---|---|
Brand Geckodrive | ||
Current Rating 7 A | ||
Voltage Rating 80 V dc | ||
Overall Length 63.5mm | ||
Overall Width 21mm | ||
Overall Depth 65.5mm | ||
- COO (Country of Origin):
- US
G203V - Stepper Drive
The G203V is the new generation CPLD-based microstep drive. It has short-circuit protection for the motor outputs, over-voltage and under-voltage protection, over-temperature protection, reversed power supply polarity protection and will survive accidental motor disconnects while powered-up. The “V” in G203V stands for “Vampire” as it is an unkillable drive.
The G203V uses a synchronous PWM design that is absolutely silent when the motor is stopped or turning slowly. It virtually eliminates stopped-motor heating regardless of power supply voltage. The G203V is a jumper-free drive. There are no internal user settings at all so there is no need to ever remove the drive cover at all.
The G203V uses a synchronous PWM design that is absolutely silent when the motor is stopped or turning slowly. It virtually eliminates stopped-motor heating regardless of power supply voltage. The G203V is a jumper-free drive. There are no internal user settings at all so there is no need to ever remove the drive cover at all.
STEP, DIRECTION and DISABLE inputs are opto-isolated
These inputs are +2.5/3.3/5 VDC compatible
Direction is clocked in on the active step pulse edge
Needs heatsinking for current settings greater than 3 amps
LED-status indicators
Power supply voltage between 15 and 80 VDC
These inputs are +2.5/3.3/5 VDC compatible
Direction is clocked in on the active step pulse edge
Needs heatsinking for current settings greater than 3 amps
LED-status indicators
Power supply voltage between 15 and 80 VDC