Over 800,000 products available

SICK VFS60A Series Incremental Mechanical Rotary Encoder 32V, 1024 ppr ppr, TTL Signal, Hollow Type, 15 mm Shaft

View all Motion Control Sensors

Subtotal (1 unit)*

£679.34

(exc. VAT)

£815.21

(inc. VAT)

Add to Basket
Select or type quantity
Stock information currently inaccessible - Please check back later
Units
Per unit
1 +£679.34

*price indicative

RS Stock No.:
223-1017
Mfr. Part No.:
VFS60A-BHPK01024 / 1036747
Brand:
SICK
Find similar products by selecting one or more attributes.
Select all

Brand

SICK

Encoder Technology

Incremental

Product Type

Mechanical Rotary Encoder

Pulses Per Revolution

1024ppr

Series

VFS60A

Maximum Revolutions

6000rpm

Output Signal Type

TTL

Shaft Type

Hollow

Shaft Diameter

15mm

Interface Type

Incremental

IP Rating

IP67, IP65

Maximum Supply Voltage

32V

Minimum Operating Temperature

30°C

Overall Depth

60mm

Overall Height

45.5mm

Standards/Approvals

EN 61000-6-2, EN 61000-6-4, IEC 60529

Overall Width

72mm

Mount Type

Flange

Maximum Operating Temperature

100°C

Switching Frequency

820kHz

Overview


Motor feedback systems from the VFS60 product family are ideally suited for use in industrial applications under rough conditions, especially for attaching to asynchronous motors. A large number of product variants meets almost all requirements: with through hollow shaft or blind hollow shaft of 8 mm to 15 mm diameter, with plug-in cable connection or pre-assembled male connector at the cable end. This means more mechanical flexibility. In addition, the robust shaft bearing increases the service life while at the same time reducing the servicing and maintenance requirements. The increased bearing distance guarantees a previously unattainable low level of vibration and optimum concentricity, even at maximum operating speed. The product families are allocated to different performance classes. From different defined line counts to a pre-programmed version. Moreover, all the common electrical interfaces are available. TTL, HTL or sine 0.5Vss.

At a glance


TTL, HTL or sine 0.5 Vpp interfaces

Resolution of up to 65,536 lines per revolution

Individual programming of the interface, line count and of the zero pulse

Direct programming via RS485

Excellent concentricity through large distance between the ball bearings

Extremely rugged

Protection class IP65

Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports

Temperature range from –30 °C to +100 °C

Insulated shaft connection through plastic collar possible

Your Benefits


Programmable version for a reduced product variety

Various programming tools designed to take into account your own programming requirements

High performance and reliability even in rough ambient conditions

High vibration resistance and extended temperature range through nickel code disk

Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system’s service life

The “insulated shaft connection” prevents electrical continuity through the bearings of the motor feedback system, thus extending the operating life of the system

Note


Product details cover the whole product family. For details on the specifications for this individual product, please refer to the datasheet.

Related links