ABB Phase Monitoring Relay, 1, 3 Phase, DPDT, DIN Rail
- RS Stock No.:
- 442-9253
- Mfr. Part No.:
- 1SVR450335R0000
- Brand:
- ABB
Image representative of range
Stock information currently inaccessible
- RS Stock No.:
- 442-9253
- Mfr. Part No.:
- 1SVR450335R0000
- Brand:
- ABB
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | ABB | |
| Monitoring Application | Phase | |
| Electrical Phase | 1, 3 | |
| Contact Configuration | DPDT | |
| Mounting Type | DIN Rail | |
| Minimum Current Sensed | 0.5A | |
| Maximum Current Sensed | 5A | |
| Current Sensitivity | Overcurrent, Undercurrent | |
| Phase Sensitivity | Phase Shift | |
| Time Delay | 0.2 → 2s | |
| Series | CM-LWN | |
| Operating Temperature Range | +65°C | |
| Terminal Type | Screw | |
| Current Range | 0.5 → 5A | |
| Dimensions | 100 x 45 x 78mm | |
| Maximum Operating Temperature | +65°C | |
| Width | 45mm | |
| Minimum Operating Temperature | -25°C | |
| Height | 78mm | |
| Length | 100mm | |
| Select all | ||
|---|---|---|
Brand ABB | ||
Monitoring Application Phase | ||
Electrical Phase 1, 3 | ||
Contact Configuration DPDT | ||
Mounting Type DIN Rail | ||
Minimum Current Sensed 0.5A | ||
Maximum Current Sensed 5A | ||
Current Sensitivity Overcurrent, Undercurrent | ||
Phase Sensitivity Phase Shift | ||
Time Delay 0.2 → 2s | ||
Series CM-LWN | ||
Operating Temperature Range +65°C | ||
Terminal Type Screw | ||
Current Range 0.5 → 5A | ||
Dimensions 100 x 45 x 78mm | ||
Maximum Operating Temperature +65°C | ||
Width 45mm | ||
Minimum Operating Temperature -25°C | ||
Height 78mm | ||
Length 100mm | ||
RoHS Status: Not Applicable
Load monitor LWN mecotron
Mainly used for asynchronous motors (cage rotors) on a single-phase or 3-phase network with significantly changing loads
The internal electrical isolation of the supply and measuring circuits means it can be used in networks that are separated
Monitors the load status of inductive users
Window monitoring cos φ min. and cos φ max. in one device
2 changeovers
Suppression time for the starting time can be adjusted from 0.3 → 30 s
Single-phase or 3-phase monitoring
3 LEDs for function monitoring
The internal electrical isolation of the supply and measuring circuits means it can be used in networks that are separated
Monitors the load status of inductive users
Window monitoring cos φ min. and cos φ max. in one device
2 changeovers
Suppression time for the starting time can be adjusted from 0.3 → 30 s
Single-phase or 3-phase monitoring
3 LEDs for function monitoring