Eaton Phase, Voltage Monitoring Relay, 3 Phase, 300 → 500V ac, DIN Rail
- RS Stock No.:
- 179-3530
- Mfr. Part No.:
- 184764 EMR6-AW500-D-1
- Brand:
- Eaton
Available to back order for despatch 21/05/2024
Added
Price Each
£208.25
(exc. VAT)
£249.90
(inc. VAT)
| Units | Per unit |
| 1 + | £208.25 |
- RS Stock No.:
- 179-3530
- Mfr. Part No.:
- 184764 EMR6-AW500-D-1
- Brand:
- Eaton
Technical Reference
Legislation and Compliance
- COO (Country of Origin):
- DE
Product Details
Eaton Multifunctional Phase Monitoring Relay, 300 to 500 V AC, 50 to 60 Hz - EMR6 Series - EMR6-AW500-D-1
This phase monitoring relay from Eaton is a safety device used to trip a circuit breaker when a fault is detected. For versatility and enhanced safety, it's a multifunctional component that can be used to monitor phase sequence or failure, undervoltage or overvoltage and current imbalances. It offers a flexible supply voltage range of 300 to 500 V AC, making it suitable for a range of industrial and commercial applications.
• Wide operating temperature range of -25°C to +60°C for use in challenging environments
• Long lifespan of 30 million operations
• Ingress protection rating of IP50 means the enclosure is protected against dust
• Short time delay of 0.1 to 30 s for rapid monitoring
• Long lifespan of 30 million operations
• Ingress protection rating of IP50 means the enclosure is protected against dust
• Short time delay of 0.1 to 30 s for rapid monitoring
How do I read the relay status?
The relay has multicoloured LEDs (light-emitting diodes) that indicate the type of fault detected. Each condition has an associated LED and/or colour (red, yellow or green) for ease of identification.
Why is monitoring phase imbalance important?
In a three-phase system, phase imbalances can make some motors carry a heavier load than others in the system. This can cause excessive heat and damage to the motor.
Note
Eaton formerly known as Moeller
Specifications
Attribute | Value |
|---|---|
| Monitoring Application | Phase, Voltage |
| Electrical Phase | 3 |
| Voltage Sensing Range | 300 → 500V ac |
| Voltage Sensitivity | Overvoltage, Undervoltage |
| Mounting Type | DIN Rail |
| Minimum Current Sensed | 3A |
| Maximum Current Sensed | 4A |
| Phase Sensitivity | Phase Failure, Phase Imbalance, Phase Sequence |
| Time Delay | 0.1 → 30s |
| Frequency Sensing Range | 50 → 60Hz |
| Series | Eaton Moeller |
| Maximum Voltage Sensed | 500V ac |
| Terminal Type | Screw |
| Minimum Operating Temperature | -25°C |
| Length | 109.5mm |
| Minimum Voltage Sensed | 300V ac |
| Dimensions | 109.5 x 22.5 x 78mm |
| Height | 78mm |
| Operating Temperature Range | +60°C |
| Minimum Frequency Sensed | 50Hz |
| Maximum Operating Temperature | +60°C |
| Maximum Frequency Sensed | 60Hz |
| Width | 22.5mm |
- RS Stock No.:
- 179-3530
- Mfr. Part No.:
- 184764 EMR6-AW500-D-1
- Brand:
- Eaton