CEC1702 clicker is a mikroBUS add-on board for evaluating the CEC1702, a full-featured 32-Bit ARM Cortex-M4 microcontroller with a complete hardware cryptography-enabled solution. Programming flexibility offers easy-to-use encryption, authentication, private and public key capabilities. The microcontroller delivers Pre-boot authentication of system firmware, Firmware update authentication, Authentication of system critical commands, and Protection of secret code and data with encryption. Download the Bootloader to program the CEC1702 clicker. The OTP memory eFUSE settings are at factory default.

Micro USB-to-UART connector
Connection pads on the edge of the board
Two LEDs, two Push Buttons and Reset Button
JTAG programming connector for mikroProg programmer
UART, SPI, I²C bus interface on mikroBUS socket
3.3 V or 5 V power supply on mikroBUS socket
Power Supply also from the micro USB connector
Dimensions 76.5 x 31.6 x 9.6 mm

Click board comes with the header strips soldered.

Click mikroBUS Boards

MikroElektronika has designed a range of boards to add new functions and enhance the development of your applications using the mikroBUS™ pinout standard socket. All in one click!
Click™ boards can add a range of sensing, Bluetooth, Wi-Fi, extra memory, UART communications, audio and much more functionality to your designs. Some boards also act as extensions for development platforms such as the Beaglebone, Arduino Uno and Raspberry Pi.