Advance Tapes AT544 Conductive Tin Clad Metallic Tape, 12mm x 33m
- RS Stock No.:
- 542-5381
- Mfr. Part No.:
- AT544
- Brand:
- Advance Tapes
Discontinued
- RS Stock No.:
- 542-5381
- Mfr. Part No.:
- AT544
- Brand:
- Advance Tapes
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Advance Tapes | |
| Total Thickness | 0.06mm | |
| Tape Type | Copper Tape | |
| Foil Thickness | 0.035mm | |
| Width | 12mm | |
| Length | 33m | |
| Conductivity | Conductive | |
| Adhesion Strength | 5 N/cm | |
| Adhesive Material | Acrylic | |
| Material Plating | Tin | |
| Tensile Strength | 40N/cm | |
| Maximum Temperature Resistance | +155°C | |
| Complies with EN Legislation | BS EN 60454 - Part 2 | |
| Minimum Temperature Resistance | -20°C | |
| Model Number | AT544 | |
Select all | ||
|---|---|---|
Brand Advance Tapes | ||
Total Thickness 0.06mm | ||
Tape Type Copper Tape | ||
Foil Thickness 0.035mm | ||
Width 12mm | ||
Length 33m | ||
Conductivity Conductive | ||
Adhesion Strength 5 N/cm | ||
Adhesive Material Acrylic | ||
Material Plating Tin | ||
Tensile Strength 40N/cm | ||
Maximum Temperature Resistance +155°C | ||
Complies with EN Legislation BS EN 60454 - Part 2 | ||
Minimum Temperature Resistance -20°C | ||
Model Number AT544 | ||
Non Compliant
- COO (Country of Origin):
- IE
AT544 35μ Tin Clad Copper Foil Masking Tape
A very specific strip tape based on a 35 mircon tin clad copper foil coated with an electrically conductive acrylic adhesive and a removable polyester masking tape. Applied on to the inner door sections of electronic cabinets prior to powder coating or spray painting.The masking tape is then removed to expose a clean and electrically contactable tin layer. This tin layer can then form a complete EMI shield contact with a suitable foam rubber door seal
Conductive acrylic adhesive
Good high and low temperature resistance
Easy unwind
Good high and low temperature resistance
Easy unwind
Standards
Tested in accordnace with ASTM D-1000 latest issue, BS EN 60454/ Part 2 (1996)-formerly VDE 0340, B.S
Approvals
Conforms to Flame Retardant requirement part only of UL510
EMI/RFI Shielding Tapes
When using these tapes galvanic compatibility should be taken into account.