Ewellix Makers in Motion LBBR 10-2LS/HV6, Bearing with 17mm Outside Diameter
- RS Stock No.:
- 284-9251
- Mfr. Part No.:
- LBBR 10-2LS/HV6
- Brand:
- Ewellix Makers in Motion
Bulk discount available
Subtotal (1 unit)*
£21.96
(exc. VAT)
£26.35
(inc. VAT)
Stock information currently inaccessible
Units | Per unit |
|---|---|
| 1 - 4 | £21.96 |
| 5 - 9 | £21.10 |
| 10 + | £20.65 |
*price indicative
- RS Stock No.:
- 284-9251
- Mfr. Part No.:
- LBBR 10-2LS/HV6
- Brand:
- Ewellix Makers in Motion
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Ewellix Makers in Motion | |
| Inside Diameter | 10mm | |
| Outside Diameter | 17mm | |
| Length | 26mm | |
| Linear Bearing Type | Linear Ball Bearing | |
| Linear Ball Bearing Type | Closed | |
| Seals | With Seals | |
| Dynamic Load Rating | 585N | |
| Static Load Rating | 415N | |
Select all | ||
|---|---|---|
Brand Ewellix Makers in Motion | ||
Inside Diameter 10mm | ||
Outside Diameter 17mm | ||
Length 26mm | ||
Linear Bearing Type Linear Ball Bearing | ||
Linear Ball Bearing Type Closed | ||
Seals With Seals | ||
Dynamic Load Rating 585N | ||
Static Load Rating 415N | ||
- COO (Country of Origin):
- DE
SKF Linear Bearings
Standard SKF linear bearings can be used to construct linear guidance systems over a wide variety of applications. These bearings are manufactured to ISO 10285 standards. SKF linear ball bearings have the advantage of being corrosion resistant due to a corrosion inhibiting preservative.
Can be used on a wide variety of applications
ISO 10285
Coated with a corrosion inhibitor
ISO 10285
Coated with a corrosion inhibitor
SKF Linear Ball Bushings & Sets
Closed ball bushings and plain bearings for XY positioning, pick and place applications and precision linear motion systems.,Plain bearings to be used in heavy shock, vibration, high acceleration or high speed situations which are unsuitable for linear ball bearings.,Note that higher frictional forces must be expected with linear plain bearings.,Ball bushings comprise a cage, in which the balls are guided, along with the raceway segments and integral seals,Further axial securing is often unnecessary when linear ball bearings and linear plain bearings are pressed into a J7 or J6 tolerance hole.