D4B-N Safety Limit Switch With Roller Plunger Actuator, NO/NC
- RS Stock No.:
- 204-1211
- Mfr. Part No.:
- D4B-1111N
- Brand:
- Omron
Currently unavailable
We don’t know if this item will be back in stock, it is being discontinued by the manufacturer.
Alternative
This product is not currently available. Here is our alternative recommendation.
Each
£26.41
(exc. VAT)
£31.69
(inc. VAT)
- RS Stock No.:
- 204-1211
- Mfr. Part No.:
- D4B-1111N
- Brand:
- Omron
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Omron | |
| Actuator Type | Roller Plunger | |
| Pole and Throw Configuration | SPDT | |
| Normal State Configuration | NO/NC | |
| IP Rating | IP67 | |
| Connection Type | Screw | |
| Series | D4B-N | |
| Length | 31.3mm | |
| Depth | 62mm | |
| Width | 40mm | |
| Mechanical Life | 10000000Cycles | |
Select all | ||
|---|---|---|
Brand Omron | ||
Actuator Type Roller Plunger | ||
Pole and Throw Configuration SPDT | ||
Normal State Configuration NO/NC | ||
IP Rating IP67 | ||
Connection Type Screw | ||
Series D4B-N | ||
Length 31.3mm | ||
Depth 62mm | ||
Width 40mm | ||
Mechanical Life 10000000Cycles | ||
RoHS Status: Not Applicable
D4B-N Series General Purpose Snap Action
The D4B-N Safety Limit Switch from Omron has snap-action contacts with a certified direct opening mechanism, N/C contacts only, to ensure safe operation should a fault occur. The switch is housed in an aluminium die-cast enclosure and has the head seal structure strengthened to provide IP67 protection.
Equipped with a mechanism that indicates the applicable operating zone, as well as push-button switching to control left and right motion
Accurate switching with safe operation via direct drive positive contact opening even with metal deposition between mating contacts
N/C for safety circuit and N/O for control circuit (SPDT)
Contact rating: 10A continuous
Four position turret head
IP67 aluminium die-cast enclosure
Conduit entry PG13.5 or M20
Operating temperature range: -40° to +80°C
Accurate switching with safe operation via direct drive positive contact opening even with metal deposition between mating contacts
N/C for safety circuit and N/O for control circuit (SPDT)
Contact rating: 10A continuous
Four position turret head
IP67 aluminium die-cast enclosure
Conduit entry PG13.5 or M20
Operating temperature range: -40° to +80°C
Standards
EN60947-5-1 and IEC 947-5-1
Approvals
UL, CSA
Approvals
UL; CSA
Safety Limit Switch