ELT 14 W, 18 W Electronic Fluorescent Lighting Ballast, 110 → 260 V
- RS Stock No.:
- 714-1420
- Mfr. Part No.:
- BE 218-4-UN
- Brand:
- ELT
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
- RS Stock No.:
- 714-1420
- Mfr. Part No.:
- BE 218-4-UN
- Brand:
- ELT
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | ELT | |
| Wattage | 14 W, 18 W | |
| Ballast Type | Electronic | |
| Supported Lamp Shape | T8 | |
| Supported Lamp Type | Fluorescent | |
| Voltage Rating | 110 → 260 V | |
| Dimmable | No | |
| High Frequency | Yes | |
| Length | 220 mm | |
| Width | 40 mm | |
| Height | 28mm | |
| Minimum Operating Temperature | -20°C | |
| Maximum Operating Temperature | +55°C | |
Select all | ||
|---|---|---|
Brand ELT | ||
Wattage 14 W, 18 W | ||
Ballast Type Electronic | ||
Supported Lamp Shape T8 | ||
Supported Lamp Type Fluorescent | ||
Voltage Rating 110 → 260 V | ||
Dimmable No | ||
High Frequency Yes | ||
Length 220 mm | ||
Width 40 mm | ||
Height 28mm | ||
Minimum Operating Temperature -20°C | ||
Maximum Operating Temperature +55°C | ||
- COO (Country of Origin):
- ES
100V to 260V Electronic Ballasts for T8 Fluorescent Tubes
Class I built-in multi-voltage ballasts for T8 tubes. Versatile multi-voltage capability (100 to 260V) therefore also suitable for 110V site lighting applications.
Ignition with pre-heating in cathodes for long lamp life without flashes and flickering
Constant total power and stabilised luminous flux
High frequency operation
High energy efficiency
Corrected stroboscopic effect
Allows the use of Class I and Class II luminaires without screening to earth in the lamps
Over voltage protection 350Vac (2 hours)
Rapid conncetor with fixing spring. Circular conductor section: 0.5 - 1.5 mm²
Constant total power and stabilised luminous flux
High frequency operation
High energy efficiency
Corrected stroboscopic effect
Allows the use of Class I and Class II luminaires without screening to earth in the lamps
Over voltage protection 350Vac (2 hours)
Rapid conncetor with fixing spring. Circular conductor section: 0.5 - 1.5 mm²