Sick L4000 Series Light Beam Receiver, 1 Beam(s), 60m Max Range
- RS Stock No.:
- 492-4994
- Mfr. Part No.:
- L40E-33MA2A
- Brand:
- Sick
Discontinued product
Alternative
This product is not currently available. Here is our alternative recommendation.
- RS Stock No.:
- 492-4994
- Mfr. Part No.:
- L40E-33MA2A
- Brand:
- Sick
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
Product Details
L4000, Type 4 Single/Multibeam System
The L4000 is a single/multi beam, non contact, safety system using a sender and a receiver arrangement and is certified according to IEC 61496 safety category Type 4.,The system consists of the UE401 controller to which, sender and receivers can be connected. Up to 4 sensor pairs can be connected to the UE401
Applications:
This device is intended for body detection of an operator under normal approach conditions toward a hazardous area
Features:
Easy installation
7 segment display
Integrated alignment aid
Reset and External Device Monitoring
2 OSSD (Output Signal Switching Device) outputs
Short response time 30ms
IP67 sender and receiver
7 segment display
Integrated alignment aid
Reset and External Device Monitoring
2 OSSD (Output Signal Switching Device) outputs
Short response time 30ms
IP67 sender and receiver
Note
Installation and operation of this safety device must be in strict accordance with accompanying operating instruction. Further guidance on the use of Active Opto-electronic Protective Devices (AOPD) is available from Health & Safety Executive guidance note HSG180.
Single Beam Safety Device
Specifications
Attribute | Value |
|---|---|
| Series | L4000 |
| Component Type | Receiver |
| Minimum Scanning Distance | 0m |
| Maximum Scanning Distance | 60m |
| Number of Beams | 1 |
| Peak Wavelength | 660nm |
| Maximum Response Time | 30 ms |
| Terminal Type | M12 Connector |
| Dimensions | M30 x 100 mm |
| Product Length | 100mm |
| Diameter | M30 |
| Application | Body |
| Features | EDM, NED, RES |