Infineon ILD403524VBOARDTOBO1, 24 V LED Driver Demonstration Board for ILD4035

  • RS Stock No. 122-2439
  • Mfr. Part No. ILD403524VBOARDTOBO1
  • Brand Infineon
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): SG
Product Details

Infineon 24V LED Evaluation Board for ILD4035 LED Driver IC

The ILD4035 24V Board is a demo board for the ILD4035 hysteretic step down LED IC driver. The resistance has been optimised to drive a string of 6 series LEDs at the max current of 350 mA with an input voltage of 24V. A “Multifunctional Pin” input terminal is included for analogue or PWM dimming. PWM dimming frequencies up to 300 Hz (at 100:1 contrast ratio) and up to 100 Hz (at 300:1 contrast ratio) are possible. The ILD4035 integrates protection features as over-voltage protection, overcurrent protection and temperature protection.
Typical applications of the ILD4035 include commercial and decorative lighting, LED replacement lamps (e.g. MR16) and architectural lighting.

Features

Wide Input Voltage Range (from 4.5 V to 40 V)
Internal switch for up to 400 mA average LED
Analogue or digital dimming possible
Soft-start capability
Low shut down current
Overcurrent protection
Over-voltage protection
Temperature protection

Specifications
Attribute Value
LED Technology LED Driver
Kit Classification Demonstration Board
Featured Device ILD4035
Kit Name 24 V
4 In stock for FREE next working day delivery
Price Each
£ 13.11
(exc. VAT)
£ 15.73
(inc. VAT)
Units
Per unit
1 +
£13.11
Related Products
The STMicroelectronics STEVAL-ILL079V1 is an inverting buck-boost LED ...
Description:
The STMicroelectronics STEVAL-ILL079V1 is an inverting buck-boost LED driver evaluation board. The board features the LED6000 current regulator. The LED600 is a monolithic current source with dimming capability, for driving high-power LEDs. The device offers a wide input voltage range, enabling you to use alternative topologies on the board, for ...
The CAT4101 is a low dropout current sink ...
Description:
The CAT4101 is a low dropout current sink capable of driving strings of high-brightness LEDs up to 1A. The current sink is programmed by a single resistor from the RSET pin to GND. Enable and dimming control is available via the EN/PWM pin. A six pin header receptacle is available ...
The CCRGEVB is an evaluation board used to ...
Description:
The CCRGEVB is an evaluation board used to demonstrate some very simple, elegant, and cost effective solutions using ON Semiconductor's Constant Current Regulator. The board is divided into four general circuits, and contains 7 CCR's. There is also a Low Vce BJT with two 4.7kΩ resistors for PWM dimming. Also ...
The ON Semiconductor is a single chip, dual-LED ...
Description:
The ON Semiconductor is a single chip, dual-LED ballast shield power management Arduino evaluation board. The dual LED driver designed for high current LEDs that provides a complete solution to drive two strings up to 60V, utilizing two internal independent buck switch channel outputs with the PCA9655E to provide 16 ...