Watson Smith 1.75L/min NPT 1/4 Female EP Converter, 2psi to 120 psi, 1 → 10 V input

View all I/P & E/P Converters

Subtotal (1 unit)*

£927.88

(exc. VAT)

£1,113.46

(inc. VAT)

Add to Basket
Select or type quantity
In Stock
  • 3 unit(s) ready to ship
  • Plus 2 unit(s) ready to ship from another location
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units
Per unit
1 +£927.88

*price indicative

RS Stock No.:
729-486
Mfr. Part No.:
540400R
Brand:
Watson Smith
Find similar products by selecting one or more attributes.
Select all

Brand

Watson Smith

Input Signal

1 → 10 V

Manufacturer Series

100X, 101X

Flow Rate

1.75L/min

Connection Size

NPT 1/4 Female

Connection Thread Standard

NPT

Maximum Operating Pressure

120 psi

Maximum Operating Temperature

+60°C

Connection Thread Size

1/4 in

Minimum Operating Pressure

2psi

RoHS Status: Exempt

COO (Country of Origin):
GB

Standard Converters


These standard converters are reliable pneumatic fittings. This range has a 1/4 inch female port and includes mounting bracket and connector plug. There is minimal vibration from this converter and it also has the benefit of being sensitive to low pressures. Proportional converters have a glass reinforced nylon cover and nitrile diaphragms. This range of pneumatic pressure control proportional converters provide excellent pressure control providing oil free, dry air filtered to 5μm.

Integral volume booster gives flow rates up to 4·72 dm3/s, 10scfm
Response time typically 2 seconds (10-90%)
Low supply pressure sensitivity
1/4 inch female port connection
Supplied with DIN43650 connector plug

Note

*Inlet pressure must be at least 0.7 bar above output pressure


I/P & E/P Converters


I/P converters are electro-pneumatic instruments that will change pneumatic pressures in response to varying electrical current and voltage input signals. They have extensive application potential in both industrial and process systems, for control of cylinders, valves, valve positioners, relays, brakes and clutches. The converters can be mounted in control rooms or in the field, and have zero and span settings that are adjustable from the front face of the instrument. Failsafe converters are available which will cause the output pressure to fall to <15mbar (0.2 psig) in the event of power failure or loss of input signal.