Analog Devices, Evaluation Board Evaluation Board for ADM3065E for UG-1000 - EVAL-ADM3065EEBZ

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The EVAL-ADM3065EEBZ and EVAL-ADM3065EEB1Z allow quick and easy evaluation of the ADM3065E 50 Mbps RS-485 transceiver with standard SOIC and MSOP footprints respectively. The evaluation boards allow the input and output functions to be exercised without external components. Screw terminal blocks provide convenient connections for power and ground, digital input and output, and RS-485 signals.

Easy evaluation of ADM3065E 50 Mbps RS-485 transceiver
Board layouts for standard half duplex RS-485 footprints
Power/ground connections through screw terminal block
IEC ESD protection on the RS-485 A and B bus pins
±12 kV contact discharge and ±12 kV air gap discharge
Screw terminal blocks for logic input/output and RS-485 signals
Jumper-selectable enable/disable for RE and DE
Test points for measuring all signals
Resistors and footprints for termination and biasing networks

Specifications
Attribute Value
Kit Classification Evaluation Board
For Use With UG-1000
Featured Device ADM3065E
Kit Name Evaluation Board
2 In stock for FREE next working day delivery
Price Each
£ 47.40
(exc. VAT)
£ 56.88
(inc. VAT)
Units
Per unit
1 +
£47.40
Related Products
The Analog Devices EVAL-1CH2CHSOICEBZ board is designed to ...
Description:
The Analog Devices EVAL-1CH2CHSOICEBZ board is designed to evaluate single and dual standard data isolators, within an 8-pin SOIC package (JEDEC standard). A full list of supported devices can be found within the User Guide. This evaluation board supports signal distribution, loop-back, loads referenced to VDDx or GNDx, and optimal ...
A range of devices which conform to the ...
Description:
A range of devices which conform to the HART (Highway Addressable Remote Transducer) industrial communications protocol. HART communications frequently utilize 4-20mA networks and are widely used in Automation and Control applications. The HART standard provides for both point-to-point (analogue or digital) and multi-drop (digital only) modes of operation, the latter ...
The Evaluation Board is based on the ADN4605, ...
Description:
The Evaluation Board is based on the ADN4605, a 4.25 Gbps 40x40 Digital Crosspoint Switch. Differential PECL/CML compatible InputsDifferential Programmable CML compatible OutputsAdjustable Receive Equalisation 3 dB, 6 dB, 12 dB boostLow Power 105 mW per channel at 2.5 VDigital Video (HDMI, DVI, DisplayPort, 3G/HD/SD-SDI) Applications.
This Analog Devices evaluation board provides a solution ...
Description:
This Analog Devices evaluation board provides a solution to the requirement for a USB cable where isolation is required for connections to machines that control dangerous voltages or low leakage defibrillation-proof connections in medical applications. The ADuM4160 Full/Low Speed USB Isolator is used to provide the primary isolating function, supported ...