These Brad® Micro-Change® M12 Field Attachable single keyways (A-Coding) Connectors allow custom cables to be assembled anywhere. The gold plated copper contacts of the Brad® Micro-Change® M12 Field Attachable Connectors have Nickel plated set screws for the attachment of up to 18 AWG (0.75 mm²) cable.

IEC compliant M12 connector
IP67, NEMA 6 rated for harsh environments
Anti-vibration feature
Stock numbers 751-9154 and 751-9166 have a cable diameter range of 3.3 - 6.6 mm with a PG7 Gland thread.
Stock numbers 751-9150 , 751-9157 , 751-9160 and 751-9163 have a cable diameter range of 4.1 - 8.1 mm with a PG9 Gland thread

Assemble custom cables for your automation equipment with the help of this Brad from Molex connector. It has highly conductive brass contacts that give you reliable signal transmission. These are silver-plated to help prevent rust in damp conditions. For a quick and secure lock on connected parts, there's also a nickel-plated brass coupling with an easy-to-use threaded nut. As it supports voltages of 250V AC (alternating current) and 300V DC (direct current), this connector is suitable for low-voltage applications in industrial systems.

• IP68 (ingress protection) rating means it resists dust and complete immersion in water up to 1.5m in depth
• Broad operating temperature range of -25°C to +90°C for reliable industrial use
• Screw termination method means no tools are needed
• Polyamide (PA) housing material for impact resistance and electrical insulation

• Machine building
• Factory automation
• Commercial vehicles

The cable gland on this connector provides a strong holding force to prevent the cable from being pulled out, especially in areas prone to vibration. It also offers strain relief, helping to reduce damage if the cable is bent at a sharp angle.

BRAD - M12