Lightweight construction
Portable equipment applications

The Schaffner IEC inlet filter is a male type, single fused, panel mount with IEC connector power entry module. It has a voltage rating of 250VAC with 6A high-performance current rating. The power entry module combines an IEC inlet, mains filter with excellent filter attenuation and fuses in a small form factor. It has a wide selection on amperage ratings, output connections, mounting possibilities. The operating frequency of this filter ranges between 0Hz and 400Hz.
Schaffner Type FN with Transient Voltage Protection
IEC Inlet plugs with integral mains filter is designed to filter mains borne interference where capacitors alone may prove inadequate. Connection by 250 (1/4in) receptacles.

Lightweight construction
Fuse drawer with easy access
Fast-On terminals
High saturation resistance
Maximum leakage current is 2μA
Operating temperature ranges between -25°C and 85°C

Electrical and electronic equipment
Household equipment
Single-phase and switch-mode power supplies
Test and measurement equipment

UL approved
CSA Certified
VDE
SEMKO
IP40 rated

UL Listed; CSA Certified; VDE; SEMKO

Schaffner Type FN with Transient Voltage Protection

IEC Inlet plugs with integral mains filter. Designed to filter mains borne interference where capacitors alone may prove inadequate. Connection by 250 ( 1/4 in) receptacles. (For insulating boots see typically stock no. 526-0724).,Voltage 250Vac max. Operating frequency DC to 400Hz.

UL recognised component, CSA certified, VDE, SEMKO