Pegler Yorkshire Bronze Globe Valve 110008, 3/4 in BSPT 32 bar

Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): TW
Product Details

Bronze Globe Valves PN32 Series B

A range of bronze globe valves, individually hydrostatically tested to BS 5154 at the following test pressures: Shell: 48 bar, Seat: 35.2 bar
Rising Stem
Threaded bonnet
Renewable disc which is suitable for steam service
Bronze trim with glass filled PTFE disk
BS21 Taper thread (ISO 7)

//media.rs-online.com/t_line/L466779-01.gif
Specifications
Attribute Value
Connection 3/4 in BSPT
Maximum Working Pressure 32 bar
Body Material Bronze
Thread Size 3/4in
Thread Standard BSPT
31 In stock for FREE next working day delivery
Price Each
£ 33.06
(exc. VAT)
£ 39.67
(inc. VAT)
Units
Per unit
1 - 4
£33.06
5 - 9
£32.04
10 +
£31.01
Related Products
This Sferaco check valve is anti-pollution to prevent ...
Description:
This Sferaco check valve is anti-pollution to prevent reverse water flow. Constructed from brass that ensures strength and reliability. Featuring a male and female connection of " (10 mm). Brass construction Control the flow of water Strong and reliable fitting "" (10 mm) connections Maximum operating pressure: 20 bars.
The Floguard range of double check valves is ...
Description:
The Floguard range of double check valves is used for the prevention of back-flow and back-syphonage contamination risks in accordance with the water supply (water fittings) Regulations 1999.Manufactured from DZR brass the WRAS approved Floguard range is supplied unplated with the exception of the Minislim, which can be supplied nickel ...
2/2- way pneumatically operated angle seat valves. Available ...
Description:
2/2- way pneumatically operated angle seat valves. Available in both NO (Normally Open) and NC (Normally Closed) configurations and with the flow direction above or below the seat For use with neutral gases, air, steam, water and oil. 2//2-way, normally closed by spring action Polyamide actuator casing and PTFE seal ...
To avoid noise in long runs of pipework ...
Description:
To avoid noise in long runs of pipework and equipment it is desirable to maintain the flow rate less than two litres per second Suitable for use with water or compressed air Can be installed in any position and serviced in situ Single piece acetal resin cartridge Preset pressure40°C maximum ...