3M Connector Holder, FC, SC, ST for use with Local Area Network
- RS Stock No.:
- 267-8087
- Mfr. Part No.:
- 80-6113-1476-8
- Brand:
- 3M
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
- RS Stock No.:
- 267-8087
- Mfr. Part No.:
- 80-6113-1476-8
- Brand:
- 3M
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
---|---|---|
Brand | 3M | |
Accessory Type | Connector Holder | |
Series | FC, SC, ST | |
For Use With | Local Area Network | |
Select all | ||
---|---|---|
Brand 3M | ||
Accessory Type Connector Holder | ||
Series FC, SC, ST | ||
For Use With Local Area Network | ||
RoHS Status: Not Applicable
- COO (Country of Origin):
- US
3M ST, SC and LC Hot Melt Fibre Optic Connectors
Hot Melt ST, SC and LC fibre optic connectors have pre-loaded adhesive within pre-radiused PC zirconia ceramic ferrules, allowing faster installation than standard connectors that need adhesive preparation and injection. The adhesive of these Hot Melt ST and SC fibre optic connectors is resettable, allowing greater scope for adjustments during assembly.
Hot Melt ST and SC fibre optic connectors only require one stage of polishing using a polishing puck for both connector types (stock number 267-8122) and one grade of polishing film (stock number 267-8144). A polishing pad is also available (see stock number 267-8138) and a SC Hot Melt connector cooling stand (stock number 267-8087) for retaining assembled SC Hot Melt connectors immediately after curing. These Hot Melt fibre optic connectors accept multi-mode 125 micron fibre cables with sheath diameters to 3mm and, once installed, provide a low loss, mechanically stable assembly.
The SC Hot Melt connector requires a crimp tool stock no. 267-8100 to terminate the body via a crimp ring to cable.
Hot Melt ST and SC fibre optic connectors only require one stage of polishing using a polishing puck for both connector types (stock number 267-8122) and one grade of polishing film (stock number 267-8144). A polishing pad is also available (see stock number 267-8138) and a SC Hot Melt connector cooling stand (stock number 267-8087) for retaining assembled SC Hot Melt connectors immediately after curing. These Hot Melt fibre optic connectors accept multi-mode 125 micron fibre cables with sheath diameters to 3mm and, once installed, provide a low loss, mechanically stable assembly.
The SC Hot Melt connector requires a crimp tool stock no. 267-8100 to terminate the body via a crimp ring to cable.
Note
Hot Melt ST Connectors have a loss repeatability of 0.2dB, 1000 matings,>while Hot Melt SC Connectors have >0.2dB, 200 matings.
Related links
- A Complete Guide to Cat 7 Cable
- Texas Instruments TCAN10 Controller Area Network Evaluation Module TCAN1042D Evaluation Module for TI CAN Transceiver
- onsemi CAN (Controller Area Network) Driver Shield Evaluation Board MBRS360BT3G PCA9655EMTTXG
- LPWAN
- Phoenix Contact Charging Connector Holder, For Use With Vehicle charging connectors on charging stations (EVSE)
- RS PRO One Click Cleaner Pen for FC Connector ST Connector
- WPAN
- Find a RS Local branch