188-39011D, 96 Way Extender Board Extender board FR4

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Extensions with metal holes

This range of PTH extension boards is available in two combinations: standard and super.
The standard 64 // 64 range is assembled with a DIN connector (front and back), and is supplied with ejector levers. The super version has a 96 // 96 connector and is supplied with all standard extension pieces plus gold-plated wrapping terminals, a connection pad and a DIN logic analyser reverse connector.
Height can be extended in multiples of 3U, thanks to the addition of an intermediate plate.
Compatible with systems 160 and 220 mm deep.
Voltage and current can be measured by a complete super version assembly or by simple division of the tracks and fitting of pins to allow the addition of connecting jumper switches.

PC / VME Bus Boards

PC Compatible Prototyping Boards

Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16. Card thickness is 1.6 mm. Copper is 305 g/m² (1 oz/ft²). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 in.). Diameter holes are pre-drilled on a 2.54 mm (0.1 in.) matrix.

Microboard Pattern

Incorporates, on the component side of the card, a colander ground plane for maximum screening and glitch free high speed operation, and complete solder mask protection.

Specifications
Attribute Value
Type Extender board
Number of Contacts 96
Base Material Epoxy Glass Fabric Laminate
Copper Thickness 35µm
FR Material Grade FR4
Thickness 1.6mm
Width 160 mm, 220 mm
3 In stock for FREE next working day delivery
Price Each
£ 274.46
(exc. VAT)
£ 329.35
(inc. VAT)
Units
Per unit
1 +
£274.46
Related Products
These boards feature special copper tracks and pads ...
Description:
These boards feature special copper tracks and pads on 0.1 in (2.54mm) pitch.Board holes 1.0mm (0.040 in). Particularly suited for use when mixing d.i.l. and discrete components on the same board. One end of the board is formed into a gold plated edge plug. Suitable 32-way connector 466-551. dia.,SRBP ,Size ...
Copper tracks and pads on a 0.1 in ...
Description:
Copper tracks and pads on a 0.1 in (2.54mm) pitch d.i.l. packages. Board holes 1.0mm (0.040 in). The component side has additional copper tracks for supply rails, etc. Drilling position marked for easy fitting of racking Card Handles or Card Fronts. Edge plugs are gold plated.,Size 114x203x1.6mm. Will accept 20 ...
Converts modular 6//6 or 8//8 type connector to ...
Description:
Converts modular 6//6 or 8//8 type connector to 2.54mm (0.1inch) pitch, made from 1.6mm thick FR-4 epoxy glass, with plated-through holes. 2 boards supplied as a single V-groved sheetSupplied with connector socket.
Board that converts SD memory-card connector signal lines ...
Description:
Board that converts SD memory-card connector signal lines to 2.54 mm pitchInstalled with connectors that meet SDA standard.