09-0106, 64 Way Double Sided DIN 41612 Extender Board Extender Board FR4 300 x 233 x 40mm
- RS Stock No.:
- 508-346
- Mfr. Part No.:
- 09-0106
- Brand:
- Vero Technologies
Subtotal (1 unit)*
£244.83
(exc. VAT)
£293.80
(inc. VAT)
FREE delivery for orders over £50.00
Temporarily out of stock
- 1 unit(s) shipping from 24 October 2025
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
|---|---|
| 1 + | £244.83 |
*price indicative
- RS Stock No.:
- 508-346
- Mfr. Part No.:
- 09-0106
- Brand:
- Vero Technologies
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Vero Technologies | |
| Type | Extender Board | |
| Connection | DIN 41612 | |
| Number of Contacts | 64 | |
| Base Material | Epoxy Glass Fabric Laminate | |
| Number of Sides | 2 | |
| Dimensions | 300 x 233 x 40mm | |
| FR Material Grade | FR4 | |
| Length | 300mm | |
| Thickness | 40mm | |
| Width | 233mm | |
Select all | ||
|---|---|---|
Brand Vero Technologies | ||
Type Extender Board | ||
Connection DIN 41612 | ||
Number of Contacts 64 | ||
Base Material Epoxy Glass Fabric Laminate | ||
Number of Sides 2 | ||
Dimensions 300 x 233 x 40mm | ||
FR Material Grade FR4 | ||
Length 300mm | ||
Thickness 40mm | ||
Width 233mm | ||
- COO (Country of Origin):
- GB
64-Way Standard Extender Board
Double-sided extender boards for testing Eurocards. The extender board plugs directly into a subtrack connector with the unique support/ejector mechanism at the front supporting the board under test.
DIN 41612 type B connectors
Solder resist coating to prevent solder bridging and finger staining
Solder resist coating to prevent solder bridging and finger staining
Supplied with
Support/eject mechanisms and terminal assemblies which may be soldered onto pads on each connector track for attaching test probes (typically for measuring voltage levels)
PC / VME Bus Boards
PC Compatible Prototyping Boards
Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16. Card thickness is 1.6 mm. Copper is 305 g/m² (1 oz/ft²). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 in.). Diameter holes are pre-drilled on a 2.54 mm (0.1 in.) matrix.
Microboard Pattern
Incorporates, on the component side of the card, a colander ground plane for maximum screening and glitch free high speed operation, and complete solder mask protection.