Enclosure Heater, 30W, 110 → 240 V, , 155mm x 64mm x 56mm

  • RS Stock No. 726-8828
  • Mfr. Part No. 3105330
  • Brand Rittal
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Enclosure Heaters - SK Series

Snap-fastening onto 35 mm support rails EN 50 022 or direct screw-fastening onto the mounting plate
PTC technology with Computational Fluid Dynamics assisted design for superior heating performance
Requires external Thermostat and or Hygrostat to regulate heating in the enclosure
Fan assisted heat flow on models 200W and above

DIN Rail Mount Enclosure Heaters

Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware.

Specifications
Attribute Value
Output Power 30W
Supply Voltage 110 → 240 V
Depth 56mm
Height 155mm
Width 64mm
7 In stock for delivery within 1 working days
Price Each
£ 108.24
(exc. VAT)
£ 129.89
(inc. VAT)
Units
Per unit
1 - 9
£108.24
10 - 24
£104.55
25 +
£99.02
Not available for guaranteed pre 9am/10am delivery
Related Products
Plug-in terminal connectionSuitable for both 50Hz and 60HzDuty ...
Description:
Plug-in terminal connectionSuitable for both 50Hz and 60HzDuty cycle 100%Heating element is resistance type with temperature monitorMounting position is airflow vertical, exit at topAirflow 50m3/h (50Hz), 61m3/h (60Hz)Constructed from aluminium extrusion, clear anodisedBinding post connection capacity: single filament 2 x 0.5 - 2.5mm2; fine multi-filament (soldered, wire and sleeve, pin ...
Plug-in terminal connectionSuitable for both 50Hz and 60HzDuty ...
Description:
Plug-in terminal connectionSuitable for both 50Hz and 60HzDuty cycle 100%Heating element is resistance type with temperature monitorFitting position is airflow vertical, exit at topAirflow 50m3/h (50Hz), 61m3/h (60Hz)Constructed from aluminium extrusion, clear anodisedBinding post connection capacity: single filament 2 x 0.5 - 2.5mm2; fine multi-filament (soldered, wire and sleeve, pin ...
HVR Pentagon anti-condensation heaters have been designed for ...
Description:
HVR Pentagon anti-condensation heaters have been designed for use where a low wattage heater is required to prevent condensation. They comprise a vitreous enamelled resistor mounted in a sheet steel case and have a removable perforated sheet steel cover. There is a cable entry grommet at each end and M4 ...
The CSK 060 is a touch-safe heater for ...
Description:
The CSK 060 is a touch-safe heater for use in enclosures. The design of the heater utilizes natural convection which results in a circulating current of warm air. The surface temperatures on the accessible side surfaces of the housing are minimized as a result of the heater design. Low surface ...