Enclosure Heater, 100W, 110 V ac, 70mm x 191mm x 67mm

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

HVR Pentagon Anti-Condensation Heaters

HVR Pentagon anti-condensation heaters have been designed for use where a low wattage heater is required to prevent condensation. They comprise a vitreous enamelled resistor mounted in a sheet steel case and have a removable perforated sheet steel cover. There is a cable entry grommet at each end and M4 terminal screws are provided on the resistor. Applications include switch and control gear cubicles.

Vitreous enamelled resistor mounted in a sheet steel case.
Removable perforated sheet steel cover.

Note

The recommended power rating required is 10W per square metre of enclosing surface, excluding the base. They should be mounted on a back surface with the heating element horizontal and the terminals at the bottom.

//media.rs-online.com/t_line/L603328-02.gif
Specifications
Attribute Value
Output Power 100W
Input Power Rating 100W
Supply Voltage 110 V ac
Surface Temperature 85°C
Depth 67mm
Height 70mm
Width 191mm
11 In stock for FREE next working day delivery
Price Each
£ 31.40
(exc. VAT)
£ 37.68
(inc. VAT)
Units
Per unit
1 - 4
£31.40
5 - 9
£29.92
10 - 24
£28.44
25 - 49
£26.96
50 +
£25.50
Related Products
Heaters specifically intended for anti-condensation and frost protection ...
Description:
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware. Suitable for both 50Hz or 60Hz operationDuty cycle 100%Heating element is PTC (positive temperature coefficient), temperature regulatingCan be mounted in any position (vertical preferred)Made from extruded aluminium section, ...
Touch-Safe heaters are designed for use in every ...
Description:
Touch-Safe heaters are designed for use in every application and area where enclosures and cases that house electrical / electronic components must be heated to avoid condensation and low temperatures. The aluminium heater body is covered with a plastic housing. This plastic housing enables the surface temperature to be significantly ...
Introducing the Compact convection heater of temperature classes ...
Description:
Introducing the Compact convection heater of temperature classes T3, T4 and T5 for use in areas with explosion hazard for prevention of formation of condensation and temperature fluctuations. Also benefitting in protection against frost in control and switch cabinets, and in measuring equipment. • For areas with explosion hazard• Large ...
Heaters specifically intended for anti-condensation and frost protection ...
Description:
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware. Enclosed heater with 0-60°C thermostatic control and LED status indicatorSelf regulating PCT heating elementsThermal cut-outClass II insulation.