Phoenix Contact 3048603 UK 10.3-CC HESI N 3POL Series Black, Single-Level, Screw Termination

The Phoenix Contact UK-5-HESI series of fuse modular terminal blocks offer excellent protection to electrical systems, protecting them against overcurrent and short-circuiting. Easily clipped onto DIN rail, the range is easily interchanged and therefore offers you greater flexibility with the part.

• Large-surface labeling

• Safety lever locked in end position

• Hinged disconnect lever

• Flip-open compartment to accommodate a fuse

• Options to accommodate 5x20mm and 6.3x32mm fuses

• Terminal width 8.2 (5x20mm), and 10.2 (6.3x32mm)

• Protecting critical sensor or relay equipment

Parameters in tech. spec. table are with respect to UL and CSA Approvals. With UL approval these products have a nominal rating of 10A @ 600V; with CSA approval they have a nominal rating of 25A @ 600V

UL recognised component, CSA certified

Protect your equipment from excess current surges or electrical malfunction with this Phoenix Contact modular terminal block. It has an Underwriters' Laboratory (UL) fire safety rating of UL94V-2 which indicates that in the event of a fire, burning will stop after 30 seconds on any vertical part to protect your equipment and workplace.
This component has a wide operating temperature range from -60°C to +85°C, making it a practical choice for use in harsh environments. It has a surge voltage rating of 2.5kV, with the additional ability to withstand voltage spikes for an added layer of electrical protection. This versatile block has a medium to large wire size of 16 to 4 American wire gauge (AWG), so it's suited a wide range of applications. A current rating of 32A makes the wires connected to it less susceptible to overheating and meltdown, increasing the safety of your setup.

• Screw terminals for simple and secure installation
• Voltage rating of 690V for high-voltage applications
• Compact dimension of 54 (W) x 81 (L) x 65.5mm (D) for space efficiency in small enclosures