MPN

MEAN WELL SDR Switched Mode DIN Rail Power Supply, 88 → 264V ac ac Input, 48V dc dc Output, 2.5A Output, 120W

RS Stock No.:: 765-4660
Distrelec Article No.:: 169-26-310
Mfr. Part No.:: SDR-120-48
Brand:: MEAN WELL

MEAN WELL SDR Switched Mode DIN Rail Power Supply, 88 → 264V ac ac Input, 48V dc dc Output, 2.5A Output, 120W

Subtotal (1 unit)*

£112.93

(exc. VAT)

£135.52

(inc. VAT)

FREE delivery for orders over £50.00

In Stock

86 unit(s) ready to ship
Plus 6 unit(s) ready to ship from another location
Plus 16 unit(s) ready to ship from another location

Need more? Click ‘Check delivery dates’ to find extra stock and lead times.

Units	Per unit
1 +	£112.93

*price indicative

RS Stock No.:: 765-4660
Distrelec Article No.:: 169-26-310
Mfr. Part No.:: SDR-120-48
Brand:: MEAN WELL

Mean Well SDR Series Single Output Industrial DIN Rail Power Supply

A range of Mean Well DIN Rail Power Supply Units (PSU) with high efficiency. They have a new smaller size making them perfect for marine and semi-conductor related usage.

Features and Benefits

• 150% peak load capacity

• Protections: Short circuit/Overload/Over voltage/Over temperature

• Cooling by free air convection

• Can be installed on DIN Rail TS-35/7.5 or 15

• UL 508 (industrial control equipment) approved

• EN61000-6-2 (EN50082-2) industrial immunity level

• Built-in DC OK relay contact

• 100% full load burn-in test

• 3 years warranty

Product Application Information

Ideal applications include factory automation, semi-conductor fabrication equipment, marine related installation and electromechanical.

Why use a DIN Rail power supply?

The flexibility of DIN Rail mounting systems enables quicker installation time as all devices are able to simply snap onto the metal rails. Power supplies can be easily organised on DIN Rails within enclosed wall boxes or in areas where there is limited space. Similar devices can be mounted next to each other reducing the amount of cabling required. Most power supplies are convection cooled so no cooling fans are needed.
DIN Rail AC to DC power supplies are widely used in many automation, instrumentation and industrial applications. They are used to power a wide variety of DC operated devices including sensors, motors, actuators, solenoids, relays and many more.

Points to consider when buying a DIN Rail power supply

DIN Rail size – There are three common types of DIN Rails. Top Hat, G section and C section. Most have a depth of 7.5 mm or 15 mm. It is wise to check that your power supply is compatible with your DIN Rail.

Protection types – It is important to choose a power supply that is protected against either short circuit, overload, over temperature or over voltage. Some power supplies also offer a hiccup mode which will allow the PSU to resume operation once the fault is cleared.

Fixed or adjustable output voltage or current – In test systems it is often convenient to have adjustable DC voltage however in other applications a fixed DC supply may be essential.

Cabling and wiring – The input/output lines to and from the power supply should be as short as possible with a large cross sectional area to help minimise noise and heat.

Efficiency – Choose a power supply that has an efficiency over 89% to minimise the amount of power dissipation, especially if the system relies on convection cooling.

Input voltage range – If the DIN Rail power supply you are buying is to be used in Europe and North America as well as the UK then a universal AC input range of 80 V ac to 264 V ac is required.

Standards – If the power supply is to be used in the USA for controlling electric motors then it will need to comply with Standard UL508, the safety standard for industrial control equipment.

Approvals

UL, CUL, TUV, CE,GL and SEMI F47

Standards

UL508, TUV EN60950-1

Mean Well SDR-120-48 Power Supply, 48 V, 2.5 A, 120 W

High efficiency 91% and low-power dissipation
Built-in active PFC function, PF >0.93

Note

Available on EPLAN.

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	MEAN WELL
	Series	SDR
	Type	Switched Mode
	Electrical Phase	1
	Number of Outputs	1
	AC or DC Input Voltage	ac
	Input Voltage	88 → 264V ac
	AC or DC Output Voltage	dc
	Output Voltage	48V dc
	Output Current	2.5A
	Dimensions	125.2 x 40 x 113.5mm
	Width	40mm
	Depth	114mm
	Height	125mm
	Standards Met	RoHS Compliant, TUV EN 60950-1, UL 508
	Maximum Temperature	+70°C
	MTBF	289.9kh
	Ripple And Noise	120mV Pk-Pk
	Minimum Temperature	-25°C
	Mounting Type	DIN Rail Mount
	Load Regulation	±1%
	Output Voltage Adjustment Range	48 → 55V
	Special Features	Overvoltage and Short Circuit Protection

	Select all
	Brand MEAN WELL
	Series SDR
	Type Switched Mode
	Electrical Phase 1
	Number of Outputs 1
	AC or DC Input Voltage ac
	Input Voltage 88 → 264V ac
	AC or DC Output Voltage dc
	Output Voltage 48V dc
	Output Current 2.5A
	Dimensions 125.2 x 40 x 113.5mm
	Width 40mm
	Depth 114mm
	Height 125mm
	Standards Met RoHS Compliant, TUV EN 60950-1, UL 508
	Maximum Temperature +70°C
	MTBF 289.9kh
	Ripple And Noise 120mV Pk-Pk
	Minimum Temperature -25°C
	Mounting Type DIN Rail Mount
	Load Regulation ±1%
	Output Voltage Adjustment Range 48 → 55V
	Special Features Overvoltage and Short Circuit Protection

Be the first to know about our latest products and services

Join our mailing list today:

The personal information you provide to us when signing up to the mailing list will be processed in line with our privacy policy.