Phoenix Contact STEP POWER Switched Mode DIN Rail Power Supply, 85 → 264V ac ac Input, 15V dc dc Output, 4A

The single-phase STEP POWER generation of compact power supply units from Phoenix Contact have a high degree of efficiency and the low standby losses make for high power efficiency. The PSU’s are available with 24 V DC output voltage in various performance classes and overall widths as well as special voltages 5, 12, 15, and 48 V DC.

These PSU's (Power supply units) have been designed more specifically for building automation, however, are not limited to explicitly that use. Low idling and maximum efficiency help to achieve higher energy efficiency. Not to mention, these power supplies have a DIN rail notch took out of the housing to allow you effortless install, on a DIN rail. DIN Rail power supply's are great for cable management, having everything in a single cabinet for consistent maintenance and ease of use.

• Easy mounting by snapping on the DIN rail or screwing onto a level surface
• Maximum energy efficiency through small losses
• Reliable power supply thanks to high MTBF (mean time between failures) of more than 500,000 hours and U/I characteristic curve
• Fast commissioning with LED function monitoring
• High operational safety by long power failure under full load
• Worldwide use by wide-range intake and international approval package
• Wide temperature range from -25 ° C to +70 ° C
• Parallel switched to increase performance and redundancy
• Outdoor installation possible
• Energy savings thanks to maximum energy efficiency and incredibly low idling losses

The design of the PSUs makes them suitable for installation distributors and flat control panels. More specifically, these STEP POWER PSU's have been designed to cater for building automation applications.

DIN rail power supplies typically feature an easy install. With the ability to mount it onto a compatible DIN rail, all you usually have to do is slide it onto one. These STEP DIN rail power supply's support NS 35 (EN 60715) rails. Once you've slid your power supply onto your rail, it is then a case of connecting your cables into the relevant inputs and outputs. Wires must be stripped 6.5mm before inserting into the terminal blocks. The terminal blocks are an effortless screw connection, making your install simple.

Effectively, a DIN rail power supply is a power supply, that is designed to be put on a DIN rail. These power supplies cater to the industrial world, rather than consumer electronics. They feature different connection methods such as terminal block connections rather than your typical 3-pin socket power. DIN Rail PSU's are designed to sit inside cabinets and work hand-in-hand with providing higher efficiency for industrial applications.

UL/C-UL Recognised (UL 60950), UL/C-UL Listed (UL 508) approved

This DIN rail power supply by Phoenix Contact with a power rating of 60W offers reliable power distribution for various applications. This compact unit is designed for single-phase input and delivers a stable output of 15V DC. With an efficiency of over 87%, it ensures maximum energy savings and minimal idling losses. Ideal for building automation, this power supply ensures a high level of performance and flexibility in installation options.

• Primary-switched power supply for DIN rail mounting
• Input voltage range of 85V AC to 264V AC for versatile compatibility
• High MTBF of over 500,000 hours for dependable operation
• Wide operating temperature range from -25°C to 70°C
• Output current of 4A with parallel connection option for increased capacity

• Suitable for industrial automation systems
• Ideal for use in electrical power installations
• Can be used for integration into building automation solutions

This power supply supports an input voltage range of 85V AC to 264V AC, ensuring compatibility with various systems.

With an operating temperature range from -25°C to 70°C, this power supply is suitable for both indoor and outdoor applications.

Yes, this unit allows for parallel connection to enhance redundancy and overall power output.

Yes, this power supply is designed to seamlessly integrate into building automation systems for enhanced operational efficiency.

With an efficiency of over 87% and incredibly low idling losses, this power supply maximises energy savings in a wide range of applications.