PULS, DIMENSION C-Line DIN Rail Panel Mount Power Supply, 24V dc Output Voltage, 5A Output Current

  • RS Stock No. 627-6174
  • Mfr. Part No. CS5.241
  • Brand PULS
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Dimension C-Series - Puls Power Supplies

The C-Series DIN Rail power supplies are affordable basic units which offer an alternative to the feature-rich Q-Series. The same standards apply to the C-Series Puls power supplies as to all other PULS products in terms of quality. They are reliable, easy to operate, have a small overall size and generous power reserves. In the 120W class, the C-Series power supplies are even smaller than the Q Series and yet are every bit as durable. This power supply has a specified life expectancy of the electrolytic capacitor of 50,000 hours. The guaranteed power boost of +20% of the rated power is intended to ensure optimal adaptation to fluctuating loads. If the ambient temperature remains below 45°C or with forced ventilation, this performance is even specified for continuous loads. The units are equipped with automatic 115/230 V range switching for increased ease of operation and fault avoidance.
The units are available in special regional versions that cover either the 100 V to 120 V or 200 V to 240 V ranges. The C series Puls power supply supports regional applications and offers extra cost savings without sacrificing functionality.

Features and Benefits

• Wide range auto select input • Minimal inrush current
• 20% Power reserves up to 45°C continuously allowed
• Large screw terminals
• CS10.242 has power factor correction to EN61000-3-2
• DC-ok LED
• Cost effective

Note

Power de-rating @ +60 to +70°C.

Standards

UL60950-1, UL508, IEC60950-1

Approvals

UL Listed

Standards

IEC, UL, EN, SELV

Specifications
Attribute Value
AC or DC Input Voltage Ac
AC or DC Output Voltage Dc
Input Voltage 100 → 120V ac
Output Voltage 24 V dc
Output Current 5 A
Power Rating 120W
Number of Outputs 1
Electrical Phase 1
Type Switch Mode
Height 124mm
Width 32mm
Load Regulation 100mV
Depth 117mm
Ripple And Noise 50mV Pk-Pk
Maximum Temperature +70°C
Minimum Temperature -25°C
Series DIMENSION C-Line
Mounting Type DIN Rail Mount
MTBF 1495000h
58 In stock for FREE next working day delivery
Price Each
£ 120.45
(exc. VAT)
£ 144.54
(inc. VAT)
Units
Per unit
1 - 4
£120.45
5 +
£114.35
Related Products
A range of single phase DIN Rail power ...
Description:
A range of single phase DIN Rail power supplies from Mean Well with a fanless design and wattages available between 45 W and 480 W. • AC input range selectable by switch• Protections: Short circuit/Overload/Over voltage/Over temperature• Cooling by free air convection• Can be installed on DIN Rail TS-35/7.5 or ...
Primary clocked switching power supply unitsWide input rangeHigh ...
Description:
Primary clocked switching power supply unitsWide input rangeHigh efficiencyAdjustable output voltages (devices > 10 W)Low power loss and low heat developmentFree convection cooling (no forced cooling by fan)Idle, overload and continuous short circuit proofIntegrated input protectionU/I characteristic curve (fold-forward behaviour on overload - does not switch off)Status indicator LEDsSuitable for ...
Omron S8FS-C series of switch mode power supplies ...
Description:
Omron S8FS-C series of switch mode power supplies are a reliable basic power supply with enhanced abnormal over-voltage resistance plus lightening surge protection providing a stable operation. A quality electrolytic capacitor has a longer life 4 times that of previous models all adding to the cost effectiveness of this series ...
The S8TS Switch mode, Din Rail mounted power ...
Description:
The S8TS Switch mode, Din Rail mounted power supply is a covered type, screw less terminal basic block without Bus Line connectors. S8TS-02505 has a power rating of 25 W and an output voltage of 5 V dc plus a rated input voltage of 100 V ac to 240 V ...