Siemens 6EP Switched Mode DIN Rail Power Supply, 100 → 240V ac ac Input, 24V dc dc Output, 20A Output, 480W

Unavailable
RS will no longer stock this product.

Alternative

This product is not currently available. Here is our alternative recommendation.

RS Stock No.:
203-4175
Distrelec Article No.:
301-19-092
Mfr. Part No.:
6EP1336-1LB00
Brand:
Siemens
Find similar products by selecting one or more attributes.
Select all

Brand

Siemens

Series

6EP

Type

Switched Mode

AC or DC Input Voltage

ac

Input Voltage

100 → 240 V ac, 85 → 264V ac

AC or DC Output Voltage

dc

Output Voltage

24V dc

Output Current

20A

Depth

125mm

Height

125mm

Width

110mm

Output Voltage Adjustment Range

22.8 → 26.4V

Ripple And Noise

150mV Pk-Pk

Mounting Type

DIN Rail Mount

Efficiency

92%

Maximum Temperature

+70°C

Minimum Temperature

-25°C

Standards Met

CE Certified, cULus

COO (Country of Origin):
CN

Siemens DIN Rail Power Supply, Green LED, 240V Input - 6EP Series - 6EP1336-1LB00


Regulate the current needed to operate your equipment with this DIN rail power supply from Siemens. The device converts a flawed input voltage to the accurate output voltage to effectively power an electrical system. It accepts voltages from 100V AC to 240V AC and creates an output voltage up to 24V in both AC and DC current. This makes it compatible with a wide array of machinery. You can reliably use this DIN rail power supply in electrical control panels and power distribution systems.

• Easy clip-on installation via DIN rails, so no need for wiring
• Green LED (light-emitting diode) status display for easy-to-read signalling
• Low 1.8kg weight for minimal strain on your setup

Can I modify the output operations of this DIN rail power supply?


You can adjust the output settings of this device using the pre-installed potentiometer.

How do I connect this device to the input and output supplies?


The voltage supply is connected by screw terminals at the bottom of the power-supply enclosure. The internal supply is attached using one screw terminal for each 0.5mm² to 2.5mm² stranded wire. The output supply is connected via two screw terminals for each wire in the same size range.

Related links