Schneider Electric Harmony XVBC Series of Modular Beacons and Tower Lights

Available as full devices or modules, which can be individually combined, Schneider Electric present the user friendly XVBC Series range. Covering every application due to the easy mounting, customisation of products and the various combinations, they are a multi-purpose solution in visual and acoustic signalling towers.

Various states of operation can be indicated, such as: Start, Stop, Fault, Call technical staff and no material. Also offering a high degree of protection, extra brightness and reliability they can be adapted to any type of environment. Designed to provide high performance, simple set up and a choice of units they can be constructed up to a maximum of 5 lens units (or 4 lights and 1 sounder), with 6 colours available.

Features & Benefits

• 'LED Protected' technology offering 100,000 hours maintenance free lighting
• Connector with removable base, axial or side cable entry
• Locking ring for assembly and fixing
• 3 types of light source
• Available as incandescent (bulbs must be ordered separately) or LED modules
• Buzzers available with intermittent or continuous tone
• All units have an operating temperature range of -25 to +50 °C (apart from the static lens units without lamps -25 to +70 °C)
• Long distance signalling 35 to 50m

Protection ratings & safety features

• High degree of protection: IP66
• International standards: CE, UL, CCC, CSA, Ghost

Applications

Loud, dangerous and busy environments often call for modular beacons and tower lights, from health & safety to preventing damage to machinery there are many applications. Below are some of the applications for the XVB Series:
• Assembly lines
• Mobile loads (travelling cranes, trolleys etc.)
• Motorway tolls
• Cash registers
• Distribution switchboards
• Alarms

Note

Bulbs, base and covers need to be ordered separately for mounting, accessories such as tubes and tube covers are also available for raising the beacons height.

Approvals

UL listed, CSA certified

The MEANWELL Industrial DIN Rail Power Supply features a narrow 30 mm casing, optimizing space in system installations. It supports an ultra-wide input range of 85–264 VAC, making it suitable for global use. With a high efficiency of up to 91% and low standby power consumption (0.6W to 1W), it promotes energy savings and carbon reduction. The unit includes built-in constant current, a fanless design, and operates reliably across a wide temperature range of -40 to +70 °C (up to +50 °C at full load). It is OVCIII compliant and features a built-in DC OK signal for system monitoring.

30mm slim width
High efficiency up to 91% and no load power dissipation 0.6W to 1W
Built-in constant current limiting circuit
Can be installed on DIN rail TS-35/7.5 or 15
3 years warranty

Select all	Attribute	Value
	Brand	MEAN WELL
	Series	XDR-120E
	DC Input Voltage	120 To 370V dc
	AC Input Voltage	85 To 264V ac
	Type	DIN Rail Power Supply
	Electrical Phase	Single
	Number of Outputs	1
	AC or DC Input Voltage	ac, dc
	Input Voltage	85 To 264V ac
	AC or DC Output Voltage	dc
	Output Voltage	12V
	Output Current	10A

	Select all
	Brand MEAN WELL
	Series XDR-120E
	DC Input Voltage 120 To 370V dc
	AC Input Voltage 85 To 264V ac
	Type DIN Rail Power Supply
	Electrical Phase Single
	Number of Outputs 1
	AC or DC Input Voltage ac, dc
	Input Voltage 85 To 264V ac
	AC or DC Output Voltage dc
	Output Voltage 12V
	Output Current 10A

MEAN WELL XDR-120E DIN Rail Power Supply, 85 To 264V ac ac, dc Input, 12V dc Output, 10A Output, 120W

FREE delivery for orders over £50.00