SEGGER J-Link PLUS

  • RS Stock No. 131-1320
  • Mfr. Part No. 8.08.28 J-Link PLUS
  • Brand SEGGER
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

J-Link PLUS Probe

J-Link PLUS is a JTAG programming and debug probe supporting a large number of processor cores. J-Link is supported by all major IDEs such as IAR EWARM, Keil MDK, Rowley CrossWorks, Atollic TrueSTUDIO, IAR EWRX, Renesas HEW, Renesas e2studio, and many others. Comes with integrated licenses for unlimited breakpoints in Flash memory, RDI / RDDI and J-Flash.

Supported Processors

• ARM7/9/11, Cortex-A5/A8/A9, Cortex-M0/M1/M3/M4/M7, Cortex-R4/R5
• Microchip PIC32
• Renesas RX100/RX200/RX610/RX621/RX62N/RX62T/RX630/RX631/RX63N

Features

• Direct download into Flash memory of most microcontrollers supported
• Download speed up to 1MB/second
• Supports unlimited breakpoints in Flash memory
• Supports breakpoints in external Flash memory of Cortex-M systems
• Supports concurrent access to CPU by multiple applications
• Remote Server included. Allows using J-Link remotely via TCP/IP
• GDB Server included
• Supports J-Flash Production Flash programming
• Supports multiple target interfaces: JTAG, SWD
• Supports SWV/SWO (Serial Wire Viewer / Serial Wire Output)
• Wide target voltage range: +1.2V to +3.3V, +5V tolerant
• Supports JTAG chains with multiple devices
• Embedded Trace Buffer (ETB) support
• Various target adapters and optical isolation adapters available
• RDI / RDDI interface DLL available
• Powered via USB connector
• Support for adaptive clocking
• All JTAG signals can be monitored, target voltage can be measured
• Target power supply: 300mA with overload protection
• Target interface: JTAG 20-pin
• PC interface: USB 2.0
• Dimensions: 100 x 53 x 27mm
• Cross-platform support (runs on Windows, Linux, Mac OS X)
• Supported by all major IDEs
• Software Developer Kit (SDK) available
• Free software updates, 1 year of support

Target Adapters & Adapter Cables

131-1325 J-Link Target Power Supply Adapter • 131-1326 J-Link 10-pin Needle Adapter
131-1327 J-Link RX100/200/600 MCU Adapter
131-1328 J-Link 19-pin ARM Cortex-M MCU Adapter
131-1329 J-Link 9-pin ARM Cortex-M MCU Adapter
131-1330 J-Link 14-pin ARM 7/9/11 MCU Adapter
131-1331 J-Link Microchip PIC32 MCU Adapter

Link Isolator Boards

131-1335 J-Link ARM JTAG Isolator Board • 131-1336 J-Link ARM SWD Isolator Board
131-1337 J-Link USB Isolator Board

Supplied with

USB cable, 20-pin ribbon cable

Specifications
Attribute Value
Product Type Programmer
For Use With Flash microcontrollers
Kit Name J-Link PLUS
140 In stock - FREE next working day delivery available
Price Each
£ 541.00
(exc. VAT)
£ 649.20
(inc. VAT)
Units
Per unit
1 +
£541.00
Related Products
J-Trace PRO for Cortex-M enables continuous streaming trace ...
Description:
J-Trace PRO for Cortex-M enables continuous streaming trace via its Gigabit Ethernet interface, lifting the limitations of internal buffers and slow data transmission. J-Trace PRO can capture complete traces over long periods - thereby enabling the recording of infrequent, hard-to-reproduce bugs. It also offers extended trace features, such as code ...
The STMicroelectronics debugger development kit is a modular ...
Description:
The STMicroelectronics debugger development kit is a modular stand-alone programming probe for the STM8 and STM32 microcontrollers. It is composed of the main module and a complementary adapter board. The development tool provides a virtual COM port interface allowing the host PC to communicate with the target microcontroller through one ...
Tester click is a Click board™ used as ...
Description:
Tester click is a Click board™ used as a diagnostic tool on the mikro BUS™ socket. It contains an array of 2x6 LEDs, which signalize the presence of the HIGH/LOW logic level on each pin, providing a visual feedback to the developer. Two additional LEDs indicate the presence of +3.3V ...
Fully integrated into Microchip’s powerful MPLAB® X Integrated ...
Description:
Fully integrated into Microchip’s powerful MPLAB® X Integrated Development Environment and easy-to-use Integrated Programming Environment. Connecting existing hardware is simple as it keeps the Segger J-Link/J-Trace 20-pin debugging connector. A compact form factor and two mounting holes permit the J-32 Debug Probe to mount securely onto development or end-user equipment ...