Maxon, DC Motor Controller, Analogue, Potentiometer Control, 10 → 50 V dc, 5 A

  • RS Stock No. 722-6694
  • Mfr. Part No. 343253
  • Brand Maxon
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CH
Product Details

DECS 50/5 Brushless Sensorless Amplifier

The digital EC sensorless amplifier is a 1-quadrant digital controller for the control of brushless dc EC motors up to 250W. Rotor position/Hall sensors are not required- the actual rotor position is evaluated by using the Back-EMF sensing technique

Functions include, digital speed control; direction, disable, motor braking, set value input 0-5 v
Maximum speed 80,000rpm (motor with 1 pole pair)
Maximum current limit adjustable
Selectable start up modes
Adjustable speed regulator gain
Motor connection either by using plug-in screw connector or flex print connector (FPC)

Note

Depending on the rotor position and size of the coupled load, there is a short start up procedure prior to motor run up, during this procedure the controller also determines the rotor position. This is achieved by the controller alternating the motor in forward and reverse direction for a very short period.

DC Drives - Brushless

Specifications
Attribute Value
Supply Voltage 10 → 50 V dc
Current Rating 5 A
Voltage Rating 800 mV
Compatible Motor Type Brushless DC Motor
Control Input Analogue, Potentiometer
Length 73.4mm
Width 50.8mm
Depth 21.9mm
Dimensions 73.4 x 50.8 x 21.9 mm
Operating Temperature Range -10 → +45 °C
8 In stock - FREE next working day delivery available
Price Each
£ 193.20
(exc. VAT)
£ 231.84
(inc. VAT)
Units
Per unit
1 +
£193.20
Related Products
Cost-effective dc motor speed controllers suitable for use ...
Description:
Cost-effective dc motor speed controllers suitable for use with shunt and permanent dc motors, such as the Parvalux range. The built-in EMC and Harmonic Filters can enable a complete drive to conform with the statutory EMC and Harmonics directives. High transient overload capability Improved commutation with considerably increased brush life ...
This module is a 4-quadrant, linear output driver ...
Description:
This module is a 4-quadrant, linear output driver which is suitable for driving small dc. motors and gear motors up to 60 watts. Only single polarity voltage supply is required to achieve bi-directional motor speed control Employs armature feedback technique to maintain speed regulation Adjustable current limit facility Short circuit ...
Microprocessor powered controller for permanent magnet, shunt wound, ...
Description:
Microprocessor powered controller for permanent magnet, shunt wound, flat style and general purpose dc. motors. Operates from a battery or rectified smooth dc. supply12 or 24V dc. supply voltage15 or 30A current rated version Forward and reverse direction control Protected against short circuit to output and polarity misconnection. Series 2600 ...
Suitable for permanent magnet and wound field dc ...
Description:
Suitable for permanent magnet and wound field dc motors Supply 12 or 24Vdc battery or linear power supply Continuous rating 24A, maximum current limited to less than 36AAdjustable electronic current limit up to 36ASpeed control by potentiometer Soft start Heatsink thermally protected Running/Fault/Trip indication Adjustable load compensation Single quadrant drive. ...