ON Semiconductor NCV7428D13R2G System Basis Chip, 1.8mA 8-Pin, SOIC

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

NCV7428 System Basis Chip, ON Semiconductor

The NCV7428 is a System Basis Chip integrating power supplies, undervoltage detection and a LIN bus transceiver typically for automotive Electronic Control Unit (ECU) applications. This device is AEC-Q100 qualified for automotive use.

• Output supply voltage: +3.3V (NCV7428D13), +5V (NCV7428D15) • Output supply current: 70mA
• Undervoltage detector with reset output to supplied microcontroller
• LIN transceiver, LIN2.x and J2602 compliant
• Load dump protection (+45V)
• LIN bus pin protected against transients in an automotive environment
• ESD protection level for Vs and LIN > ±8kV
• Operating temperature range: -40 to +125°C
• AEC-Q100 qualified

RS Product Codes

842-7885 NCV7428D13R2G System Basis Chip, +3.3V output
842-7888 NCV7428D15R2G System Basis Chip, +5V output



Attribute Value
Minimum Output Voltage 3.234 V
Maximum Output Voltage 3.366 V
Minimum Input Voltage 5.5 V
Maximum Input Voltage 28 V
Minimum Output Current 1.8mA
Maximum Output Current 70mA
Mounting Type Surface Mount
Package Type SOIC
Pin Count 8
Maximum Operating Temperature +150 °C
Minimum Operating Temperature -40 °C
Dimensions 4.98 x 3.99 x 15.49mm
Width 3.99mm
Height 15.49mm
Length 4.98mm
Automotive Standard AEC-Q100
Available to back order for despatch 26/08/2020
Price Each (In a Pack of 10)
£ 0.688
(exc. VAT)
£ 0.826
(inc. VAT)
Per unit
Per Pack*
10 - 90
100 +
*price indicative
Packaging Options:
Related Products
The MC3390x devices are System Basis Chips featuring ...
The MC3390x devices are System Basis Chips featuring multi-output power supplies, safety supervision and a CAN transceiver for automotive-based microcontroller systems. • Flexible SMPS pre-regulator allowing two topologies: non-inverting buck-boost or standard buck• Switch mode power supply (SMPS) for MCU Vcore supply: +1.2V or +3.3V @ 0.8A (MC33907)• LDO regulator ...
The S34ML01G2, S34ML02G2, and S34ML04G2 series is offered ...
The S34ML01G2, S34ML02G2, and S34ML04G2 series is offered with a 3.3-V VCC power supply, and with x8 or x16 I/O interface. Its NAND cell provides the most cost-effective solution for the solid state mass storage market. The memory is divided into blocks that can be erased independently so it is ...
The FTDI Chip FT232R is a USB to ...
The FTDI Chip FT232R is a USB to serial UART interface with optional clock generator output. Asynchronous and synchronous bit bang interface modes are also available. Together with EEPROM, clock circuit and USB resistors effectively makes it a "3 in 1" chip for some applications. The internally generated clock (6 ...
The FTDI Chip FT230X and FT234XD are Ful ...
The FTDI Chip FT230X and FT234XD are Ful Speed USB to basic serial UART interface devices. The FT231X is a Full Speed USB to Full Handshake UART interface.They have a fully integrated MTP memory and an integrated clock circuit which requires no external crystal which helps to reduce external component ...