Phoenix Contact, SUBCON-PLUS-CAN/PG 9 Way Cable Mount D-sub Connector Male/Female, 2.77mm Pitch

Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

Phoenix Contact SUBCON-PLUS-CAN D-Sub Connectors

SUBCON-PLUS-CAN 9 pin D-sub socket connectors designed for use in CAN systems up to 1 MBit/s (CAN, CANopen, SafetyBus-P) allowing fast connection of incoming and outgoing bus cables under field conditions. These SUBCON-PLUS-CAN d-sub connectors have a 120 Ohm integrated terminating resistor which can be activated externally by a slide switch, segment by segment startup, a shielded ABS housing, screw connections and can all be used with bus cables as per the CiA Draft Recommendation 303-1 with an outside diameter of 8mm.
Stock numbers 801-9119, and 648-3518 have two 35° angled cable entries and an internal connection unit which can be turned around enabling cable insertion from the left or the right. Stock number 648-3518 has a second d-sub connection for connecting a programming device. These all accept a cable cross section of 7.6mm to 8.4mm.
Stock number 648-3495 has a 35° angled cable entry and can accept a variable cable diameter range of 6 to 10mm.
Stock number 648-3502 has a 180° axial cable entry and two cable entries
For suitable screwdriver see stock number 390-9663

BUS connectors

Rewireable bus interface connectors suitable for Bitbus, CAN-Bus, Interbus-S (Fieldbus) and Profibus systems. Compact and high quality, the 9-pole sub-D housings are available in bus node or bus termination versions and are colour-coded for easy identification. Service nodes are also available for CAN-Bus and Profibus systems, allowing online programming and repair. Each interface comes with detailed assembly instructions and mounting accessories.

Available in versions with horizontal or vertical cable outlets
Fast and reliable connection via screw terminals on the PCB
Bus terminations include SMT termination resistors
Colour-coded bodies aid installation and repair
Safe ESD protection thanks to fully insulated housings
Supplied with reliable crimp strain relief

Specifications
Attribute Value
Number of Contacts 9
Gender Male/Female
Body Orientation Straight
Mounting Type Cable Mount
Pitch 2.77mm
Termination Method Screw Terminal
Current Rating 100.0mA
Housing Material Metal Plated ABS
Voltage Rating 50.0 V
Length 58.0mm
Width 39.4mm
Depth 16.6mm
Dimensions 58 x 39.4 x 16.6mm
Minimum Operating Temperature -20.0°C
Maximum Operating Temperature +75°C
Contact Material Copper Alloy
Series SUBCON-PLUS-CAN/PG
1 In stock - FREE next working day delivery available
27 available from Europe for delivery within 1 working day(s)
Price Each
£ 48.16
(exc. VAT)
£ 57.79
(inc. VAT)
Units
Per unit
1 - 24
£48.16
25 - 74
£45.70
75 - 199
£43.44
200 - 399
£41.27
400 +
£39.20
Related Products
SEAL-D 772, 773 and 774 series standard density ...
Description:
SEAL-D 772, 773 and 774 series standard density IP67 sealed D-Sub connectors available as cable mount, vertical PCB mount and right angle PCB mount. These SEAL-D IP67 D-Sub connectors meet IEC-529-IP67 requirements and have a sealing technology which maintains the same physical size and footprint as standard D-Sub connectors. This ...
Shell Type=Full Metal Shell, Connector Style=Receptacle, Connector System=Cable-to-Board, ...
Description:
Shell Type=Full Metal Shell, Connector Style=Receptacle, Connector System=Cable-to-Board, Shell Size=1, Shielded=Yes, Preloaded=Yes, Number of Positions=9, Insert Material=Thermoplastic, Contact Base Material=Phosphor Bronze, Contact Size=20, Contact Current Rating (Max)=3 A, Termination Method to Wire & Cable=Solder, PCB Mount Retention Type=None, Mating Connector Lock=With, Mating Connector Lock Type=Mounting Holes, Connector Mounting Type=Board Mount, ...
The compact, high quality 9-way D-sub housings are ...
Description:
The compact, high quality 9-way D-sub housings are available in Bus node or Bus termination versions and are colour coded for ease of identification. For CAN-Bus and Profibus systems, service nodes are also available, enabling programming or 'on-line' servicing to take place. Each Interface is supplied with full mounting hardware ...
AMPLIMITE HDF-20 series low profile IDC All-Plastic d-sub ...
Description:
AMPLIMITE HDF-20 series low profile IDC All-Plastic d-sub connectors for round conductor flat ribbon cable. These AMPLIMITE HDF-20 series IDC All-Plastic d-sub ribbon cable connectors have pre-assembled black 94V-0 rated thermoplastic housings and covers, standard 3.05mm mounting holes and are pre-loaded with duplex plated phosphor bronze contacts that accept 28 ...