Dormer Cutting Fluid 400 g Bottle

  • RS Stock No. 196-3441
  • Mfr. Part No. SUPERCUT 400G
  • Brand Dormer
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Dormer Supercut Cutting Fluid, 400g Bottle

Supercut cutting lubricant from Dormer comes in a 400g bottle and is a hand applied metal cutting fluid for use on all metals. This cutting fluid helps to reduce heat that is caused by friction to give a great surface finish and helps extend the life of the cutter.

Cutting fluids are very important in machining processes and should have good cooling and lubricating properties. These fluids can be used as either a coolant or lubricant during various metalworking and machining techniques on both the material being worked and the tools working it. By using cutting fluids the following can be achieved, longer tool life by preventing rust and corrosion, reducing scrap and producing parts with the desired surface quality.

Features and Benefits:

Appearance: yellow liquid supplied in a 400g bottle
Excellent cutting performance
Higher viscosity formula
Excellent adhesion to tool - longer tool life
Mineral oil-free
Does not contain sulphur
Low odour fluid, solvent-free formula
Fluid can be used on all metals
Non CFC/HCFC aerosol with low viscosity formula
5L version is also available RS stock number 340-9573

Typical Applications

Cutting fluids provide lubrication and cooling and are generally applied while the machining or cutting operation is taking place. The fluid cools the work piece and tool by carrying away the heat generated during machining. Cutting fluids act as a lubricant at the friction areas, which increases the tool life. Examples of operations where cutting fluids are used include:
Drilling
Broaching
Milling
Threading

FAQs
Why can’t water be used as a cutting fluid?
Cutting fluid is used to cool the cutter down and lubricate the cutting surface. If water is used it will boil off and it will not lubricate. Water will also cause corrosion problems for the cutter.

Specifications
Attribute Value
Package Size 400 g
Trade Name Supercut
Product Category Fluid
Package Type Bottle
115 In stock for FREE next working day delivery
Price Each
£ 13.77
(exc. VAT)
£ 16.52
(inc. VAT)
Units
Per unit
1 +
£13.77
Related Products
Foaming metal cutting lubricant for use on vertical ...
Description:
Foaming metal cutting lubricant for use on vertical surfaces or where longer contact time is required. Dissipates heat, does not smoke or fume Allows heavier close tolerance cuts Multi-metal use, particularly suited for use with high carbon, high speed and high tensile steels Suitable for reaming, tapping and drilling operations. ...
A system cleaner for use with water mix ...
Description:
A system cleaner for use with water mix cutting fluids, especially designed for use prior to re-charging machine tools with fresh cutting fluids. A biocide based cleaner and slime remover that cleans and disinfects in one operation Eliminates micro-organisms (aerobic and anaerobic bacteria, yeast, moulds)Can be used whilst machine is ...
The CRC super tapping fluid II is a ...
Description:
The CRC super tapping fluid II is a non-chlorinated tapping lubricant that is suitable for the most severe operations in heavy-duty ranges. The tapping fluid has a 360° spray valve and an extension tube attached making it easier to reach some area and reduce waste. Anti-welding properties Reduces friction Increases ...
The Rocol 300ml RTD spray is a metal ...
Description:
The Rocol 300ml RTD spray is a metal cutting lubricant specially formulated to provide extreme pressure cutting performance in an economical to use foaming aerosol. RTD foam cut is suitable for all the metal cutting operations on a wide range of ferrous and non-ferrous metals, including copper, brass and aluminium. ...