Hengstler TICO 732 Counter, 6 Digit, 5kHz, 115 V ac
- RS Stock No.:
- 200-1140
- Mfr. Part No.:
- 0 732 067
- Brand:
- Hengstler
Image representative of range
Currently unavailable
We don’t know if this item will be back in stock, it is being discontinued by the manufacturer.
- RS Stock No.:
- 200-1140
- Mfr. Part No.:
- 0 732 067
- Brand:
- Hengstler
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Hengstler | |
| Supply Voltage | 115 V ac | |
| Count Mode | Hours | |
| Display Type | LED | |
| Input Type | Voltage | |
| Connection Type | Screw | |
| Reset Method | Automatic, Manual | |
| Number of Digits | 6 | |
| Mounting Type | Panel Mount | |
| Output / Interface | Relay, Transistor | |
| Digit Height | 7.6 mm | |
| Maximum Count Frequency | 5kHz | |
| Display Range | -99999 → 999999 | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | +50°C | |
| Series | TICO 732 | |
| Measurement Range | -99999 → 999999 | |
Select all | ||
|---|---|---|
Brand Hengstler | ||
Supply Voltage 115 V ac | ||
Count Mode Hours | ||
Display Type LED | ||
Input Type Voltage | ||
Connection Type Screw | ||
Reset Method Automatic, Manual | ||
Number of Digits 6 | ||
Mounting Type Panel Mount | ||
Output / Interface Relay, Transistor | ||
Digit Height 7.6 mm | ||
Maximum Count Frequency 5kHz | ||
Display Range -99999 → 999999 | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature +50°C | ||
Series TICO 732 | ||
Measurement Range -99999 → 999999 | ||
- COO (Country of Origin):
- DE
Dual Preset - Counter/tachometer/timer
Multifunction units housed in a panel mounting case (DIN 43700)
Prescaler option - multiplier programmable from 0.001 to 9.999 (counter and tachometer modes)
The unit may be set in any of three modes: Counter Mode; Tachometer Mode; Time Meter Mode
Counter mode: can be programmed for quadrature, differential, count/direction
Tachometer mode: incoming pulses are counter per gate time, which can be pre-selected. Over speed or under speed can also be indicated
Time meter mode: programmable time ranges and decimal point
45 x 45mm panel cutout
Prescaler option - multiplier programmable from 0.001 to 9.999 (counter and tachometer modes)
The unit may be set in any of three modes: Counter Mode; Tachometer Mode; Time Meter Mode
Counter mode: can be programmed for quadrature, differential, count/direction
Tachometer mode: incoming pulses are counter per gate time, which can be pre-selected. Over speed or under speed can also be indicated
Time meter mode: programmable time ranges and decimal point
45 x 45mm panel cutout
Hengstler Panel Mounting 48 x 48
Range of resettable counters with data retention rated at greater then 10 years. Prescaler options and Multiplier scaling outputs for correctly displaying engineering units. Units have a maximum count frequency of either 30Hz or 5kHz depending on setting. Inputs are either NPN/PNP signal or contact closure.