MPN

Schneider Electric LC1F Series Contactor, 220 V ac Coil, 4-Pole, 150 A, 80 kW, 4NO, 1 kV ac

RS Stock No.:: 608-9986
Mfr. Part No.:: LC1F1504M7
Brand:: Schneider Electric

Schneider Electric LC1F Series Contactor, 220 V ac Coil, 4-Pole, 150 A, 80 kW, 4NO, 1 kV ac

Image representative of range

Currently unavailable

We don’t know if this item will be back in stock, it is being discontinued by the manufacturer.

Alternative

This product is not currently available. Here is our alternative recommendation.

Schneider Electric TeSys F LC1G150 Contactor, 200 → 500 V ac/dc Coil, 4-Pole, 275 A, 1 NO + 1 NC

RS Stock No.: 249-4741

Each

£775.60

(exc. VAT)

£930.72

(inc. VAT)

RS Stock No.:: 608-9986
Mfr. Part No.:: LC1F1504M7
Brand:: Schneider Electric

Schneider Electric Contactors - LC1D TeSys D Series

Electric motor sizes are increasing, especially in applications such as HVAC+R and large industrial processes. In response, Schneider Electric is extending the TeSys range of block type contactors for AC3 duty. TeSys F Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The LC1F series has been designed for integration in control systems and for motor control or resistive load applications. The TeSys F contactors offer quick simple setup while maintaining compliance with international standards.

Features and Benefits

• North American and International terminal markings

• Panel mounted with supplied screws

• Bidirectional peak limiting diode suppressor to protect the coil

• Fully tested, approved, and certified by national and international bodies: IEC, CCC, CSA, UL

• Easily installed accessories

• Flexible control circuit to suit a wide range of applications

• For AC supply refer to the LX9 coils and for a DC supply refer to LX4 coils

Applications:

• Industrial control systems
• Switching contractors or relay coils
• Powering control and signalling switches

What does the utilisation category AC1 and AC3 mean for the TeSys contactors?

Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions.

AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.

AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running.

Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.

Simplified design, installation and maintenance

The TeSys F series features a flexible design with a wide range of compatible components to support design requirements. A wide range of auxiliaries provide additional contacts where needed and drawer-mounted coils allow easy maintenance and reduce downtime.

Is the TeSys F range a double break pole type contactor?

Yes the TeSys F range uses linear translation movement that provides double breaking of the poles.

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	Schneider Electric
	Coil Voltage	220 V ac
	Number of Poles	4
	Contact Voltage Rating	1 kV ac
	Contact Current Rating	150 A
	Series	LC1F
	Power Rating	80 kW
	Range	TeSys F
	Normal State Configuration	4NO
	Terminal Type	Screw
	Length	170mm
	Width	200.5mm
	Depth	171mm
	Minimum Operating Temperature	-5°C
	Maximum Operating Temperature	+55°C

	Select all
	Brand Schneider Electric
	Coil Voltage 220 V ac
	Number of Poles 4
	Contact Voltage Rating 1 kV ac
	Contact Current Rating 150 A
	Series LC1F
	Power Rating 80 kW
	Range TeSys F
	Normal State Configuration 4NO
	Terminal Type Screw
	Length 170mm
	Width 200.5mm
	Depth 171mm
	Minimum Operating Temperature -5°C
	Maximum Operating Temperature +55°C

Be the first to know about our latest products and services

Join our mailing list today:

The personal information you provide to us when signing up to the mailing list will be processed in line with our privacy policy.