Schneider Electric TeSys D Contactor, 380 V ac Coil, 3-Pole, 95 A, 45 kW, 1NC + 1NO

TeSys Deca contactor, 3 poles (3NO), for motor control applications up to 95A/1000V AC-3/AC-3e (45kW@400V). They can be used to create motor starters for almost any type of application. It provides a 380V 50/60Hz AC coil, 1NO+1NC built-in auxiliary contacts, power connection by screw terminals and control by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (85mm width), DIN-rail mounting or screw fixing. Contactor is rated for 25HP at 200 to 208VAC, 30HP at 240VAC, 60HP at 480VAC and 60HP at 600VAC three phase. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh). Contactor is supplied with a 380 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.35 inches wide and 5.12 inches deep. It weighs 3.55 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

• Compact dimensions of 127 (H) x 85 (W) x 130mm (D) make it a space-efficient solution for tight setups
• Weighs just 1.61kg, so it's easy to handle during assembly
• Can be mounted on a DIN rail or plate to suit your application's needs
• Mechanical durability of 4 million operating cycles assures you of long-term service

• Material handling
• Assembly lines
• Construction sites
• Lighting systems

This component falls into the AC-3, AC-3e, AC-1 and AC-4 utilisation categories, so you can use it to manage resistive loads. It also works with squirrel-cage motors that incorporate starting, plugging and inching as part of their routine.