Atmel ZigBit USB Stick AT86RF233 RF Transceiver Development Kit for XMEGA 2.4GHz ATZB-X-233-USB
- RS Stock No.:
- 800-7591
- Mfr. Part No.:
- ATZB-X-233-USB
- Brand:
- Atmel
Currently unavailable
We don’t know if this item will be back in stock, it is being discontinued by the manufacturer.
- RS Stock No.:
- 800-7591
- Mfr. Part No.:
- ATZB-X-233-USB
- Brand:
- Atmel
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Atmel | |
| RF Technology | RF Transceiver | |
| Kit Classification | Development Kit | |
| For Use With | XMEGA | |
| Featured Device | AT86RF233 | |
| Frequency | 2.4GHz | |
| Kit Name | ZigBit USB Stick | |
Select all | ||
|---|---|---|
Brand Atmel | ||
RF Technology RF Transceiver | ||
Kit Classification Development Kit | ||
For Use With XMEGA | ||
Featured Device AT86RF233 | ||
Frequency 2.4GHz | ||
Kit Name ZigBit USB Stick | ||
- COO (Country of Origin):
- MY
ZigBit 2.4GHz AT86RF233 XMEGA USB Stick
The Atmel ZigBit™ USB Stick ATZB-X-233-USB supports the AT86RF233 + ATxmega256A3U MCU wireless module. It is used to evaluate the module while plugged into a USB socket on a PC. The ZigBit module is compatible with a ZigBee stack that supports a self-healing, self-organizing mesh network, while optimizing network traffic and minimizing power consumption.
ZigBit ATZB-X0-256-3-0-C Module
USB connector
Jumper link for Bootloader enable
Header for JTAG programming
2 x User LEDs
ZigBit reset pushbutton
Pre-programmed bootloader and Performance Analyzer
Powered from USB connection
ZigBit ATZB-X0-256-3-0-C Wireless System-on-Module
AT86RF233 2.4GHz ISM-Band Transceiver
ATxmega256A3U microcontroller with 256KB Flash memory, 4KB EEPROM, 16KB RAM
RF Output Power: Up to +3.6dBm
Receiver sensitivity: -96dBm
Modulation: O-QPSK
16 channels @ 5MHz
OTA data rate: 250kbps (IEEE 802.15.4)
AES-128 encryption
Pre-loaded with Atmel assigned 64-bit MAC address
Serial communication: UART, USART, SPI, I2C
Up to 32 x GPIO
Built-in chip antenna
MS-147 RF test connector
Power supply: +1.8 to +3.6Vdc
Dimensions: 33 x 20 x 3.2mm
Applications: Industrial Control, Residential and commercial automation, Security, HVAC control and local communication for the Internet of Things (IoT)
USB connector
Jumper link for Bootloader enable
Header for JTAG programming
2 x User LEDs
ZigBit reset pushbutton
Pre-programmed bootloader and Performance Analyzer
Powered from USB connection
ZigBit ATZB-X0-256-3-0-C Wireless System-on-Module
AT86RF233 2.4GHz ISM-Band Transceiver
ATxmega256A3U microcontroller with 256KB Flash memory, 4KB EEPROM, 16KB RAM
RF Output Power: Up to +3.6dBm
Receiver sensitivity: -96dBm
Modulation: O-QPSK
16 channels @ 5MHz
OTA data rate: 250kbps (IEEE 802.15.4)
AES-128 encryption
Pre-loaded with Atmel assigned 64-bit MAC address
Serial communication: UART, USART, SPI, I2C
Up to 32 x GPIO
Built-in chip antenna
MS-147 RF test connector
Power supply: +1.8 to +3.6Vdc
Dimensions: 33 x 20 x 3.2mm
Applications: Industrial Control, Residential and commercial automation, Security, HVAC control and local communication for the Internet of Things (IoT)
Note
AT86RF233 + ATxmega256A3U module: 800-7602