Seeed Studio 109990063, Bluetooth, CATV, DTV, GPRS, GSM, LTE, Satellite, WiFi, Wireless Audio, Wireless Video RF

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Seeed Studio RF Explorer

The Seeed Studio RF explorer is a 6G combo kit with a handheld digital spectrum analyser. It is an affordable tool for all popular frequency bands. It is based on a highly integrated frequency synthesizer and double-balanced mixer that offers high-performance, compact size, low consumption and low-cost. Designed for indoors and outdoors, The Seeed Studio RF explorer can also be connected to a PC for extra functionality using standard mini-USB 2.0 connector. This device includes a 6G baseline unit plus an RFEMWSUB3G expansion module conveniently assembled and tested. It comes with 2 SMA connectors and 3 antennas: a nice dual-band telescopic 144/430MHz wideband telescopic antenna for all sub-GHz frequencies, a rubber duck 5.8GHz and a whip helical for 2.4GHz band. However, specific band antennas may be needed to efficiently cover some of the frequencies supported. The combination of these 2 models offers coverage for most used communication frequency range used in modern communication technologies including Wi-Fi, Bluetooth, wireless audio and video, LTE, GSM, GPRS, satellite, CATV and DTV.

Features and Benefits

Pocket size and light weight
Solid aluminium metal case
Includes a transport EVA carry case for RF explorer
Spectrum analyser mode with peak max and hold, normal, overwrite and averaging modes
Lifetime free firmware upgrades available, open to community requested features
High capacity for more than 16 hours of continuous run
Rechargeable by USB
Windows PC client open-source
Wide band coverage to all popular RF frequencies, starting at 15MHz and going up to 2.7GHz, as well as 4.85-6.1GHz that includes frequency areas such as 2m HAM radio, all VHF and UHF, FM radio, GPS, Wi-Fi and WiMax and Bluetooth
Firmware: RF Explorer 6G combo delivered with upgraded firmware v1.12


Wireless communication
Electromagnetic interference measurement
Electronics laboratories
Noise detectors


CE certified

Attribute Value
RF Technology Bluetooth, CATV, DTV, GPRS, GSM, LTE, Satellite, WiFi, Wireless Audio, Wireless Video
Classification 6G Combo
Kit Classification RF Explorer 6G Combo
For Use With Indoor, Mini USB 2.0 Connector, Outdoor, PC
Kit Name 6G Combo
Frequency 5.8GHz
Available to back order for despatch 07/04/2021
Price Each
£ 282.99
(exc. VAT)
£ 339.59
(inc. VAT)
Per unit
1 - 4
5 - 9
10 +
Related Products
4G LTE-NA click carries the LARA-R204 multi-mode cellular ...
4G LTE-NA click carries the LARA-R204 multi-mode cellular module from u-blox. The board is designed to use 5V power supply. I/O voltage levels could be 3.3V or 5V. It communicates with the target microcontroller over UART interface, with additional functionality provided by the following pins on the mikro BUS™ line: ...
The Wio LTE Cat M1 / NB1 is an exciting IoT focused addition to our Wio cellular series which will provide you a more convenient IoT design and prototyping experience. The board features a M4 processor, a ublox modem with the new LTE Cat M1 and NB1, GNSS, and more.LTE ...
Wio Tracker (Wireless Input Output) is an open ...
Wio Tracker (Wireless Input Output) is an open source gateway which enable faster IoT GPS solutions. It is Arduino and Grove compatible development boards that helps you track nearly any moving thing on the planet and then upload that data wire lessly. The Wio LTE is the LTE version of ...
Link It Smart 7688 is an open development ...
Link It Smart 7688 is an open development board which is based on Open Wrt Linux distribution and MT7688. The board is designed especially to enable the prototyping of Rich IoT Application for Smart Home. The board offers you the memory and packet storage to enable robust video processing. The ...