Ceramic Heating Element, 400mm, 200 W, 230 V ac

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): FR
Product Details

Cold-formed heating resistors

Formable heating resistors can take on any shape after forming and may therefore be used to replace faulty specific resistors, or in a normal capacity on injection nozzles, sheaths and cylindrical parts.
The internal bend radius is 8 mm for the round sleeve and 7 mm for the square section.
The resistor must be formed to be slightly smaller than the part that will be heated, to ensure good contact.
The heating length must be determined according to the part to be heated.
A formed CFR may not be reformed.

Strip Heating Elements

Note

To obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them

Approvals

UL Recognised; CSA Certified

Warning

  • For reasons of safety the heater block and/or heater sheath must be bonded to earth
Specifications
Attribute Value
Heating Element Form Formable Coil Heaters
Power Rating 200 W
Supply Voltage 230 V ac
Length 400mm
Width 3.7mm
8 In stock for delivery within 1 working days
Price Each
£ 81.07
(exc. VAT)
£ 97.28
(inc. VAT)
Units
Per unit
1 - 4
£81.07
5 - 9
£78.58
10 +
£76.86
Not available for guaranteed pre 9am/10am delivery
Related Products
In order to obtain optimum performance from these ...
Description:
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them. Cartridge heaters have high temperature lead wires that can stand temperature of up to 450̊CHigh impact ceramic cap suitable for high vibration applicationsDeep holes in ceramic cap prevents ...
In order to obtain optimum performance from these ...
Description:
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them. Cartridge heaters have high temperature lead wires that can stand temperature of up to 450̊CHigh impact ceramic cap suitable for high vibration applicationsDeep holes in ceramic cap prevents ...
In order to obtain optimum performance from these ...
Description:
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them. Cartridge heaters have high temperature lead wires that can stand temperature of up to 450̊CHigh impact ceramic cap suitable for high vibration applicationsDeep holes in ceramic cap prevents ...
In order to obtain optimum performance from these ...
Description:
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them. Cartridge heaters have high temperature lead wires that can stand temperature of up to 450̊CHigh impact ceramic cap suitable for high vibration applicationsDeep holes in ceramic cap prevents ...